Inspect When Flashcards
Portable generators
Weekly for 15 min
Lights for 5
KO Curtain
Weekly at MUD
AFTER use
Partner. Saw
Start of each tour
After each use
Visual inspect of belt at MUD AND after use
Hurst tool
Daily
After use
Routine maintenance on multiversal
Quarterly
Portable ladders
Weekly
After use
Grease every year
Wax every 3 months
Ball bearings 1 to 2 drops once a year
Intercom on tower ladder
Daily
Initial stages of operation
Decon shower trailer and generator
Weekly
PPF Fans
9x6
MUD
HRN tip
Mud and before use
Thermal imaging camera
After 9x6 and 6x9
After each use
Geiger counter
Weekly on Wednesdays at 2030
Before operation
UltraRadiac
Officers at the start of each tour tested and dose cleared
FF before use
Emergency power system on teleprinter
First of every month
Spare cylinders
Weekly on Mondays
Note inspect for full pressure ..
Stored cylinders found below full should be tagged and returned to MSU
SCBA
- Immediately after start of 9x and 6x
- Immediately before start of MUD
- After each use
APR adaptor and Scott CRN CAP 1
Before use
At least every 30 days or once a month
A visual check of compression and tension bolts a turntable 5 th wheel shall be made for missing or sheared bolts
During mud at ops or in quarters
Chain saw
Weekly
Nylon tubular webbing
Monthly and after use
Can be cleaned with mild soap and water
Pressurized water extinguisher
Daily and after use
Cold water suit
Jan April July October
In jan/july hang suit for 48 hours
PAC tracker
Inspect and test before use and start of each tour ?