Hotspot Flashcards
Here you will find answers to hotspot questions in ICND 1 exam
Refer to the topology. Using the information shown, answer the five questions shown on the Questions tab.
Question 1:
On which router should a default route be configured?
A – on the ISP router
B – on R1
C – on R2
D – on R3
E – on R4
Question 2:
With all links operational and all routers converged, which of the following describes the messaging between routers?
A – Hellos are sent every five seconds.
B – Multicasts are sent every 60 seconds.
C – Broadcasts are sent every 30 seconds.
D – No messaging unless the topology changes.
Question 3:
Which of the following describes the route update process if the interface from R4 connected to LAN 4 goes down?
A – No updates occur
B – R4 tells both R1 and R3 the network not accessible. Both R3 and R1 update R2.
C – R4 tells only R1 the network is not accessible. R1 updates R2 and R2 updates R3.
D – R4 tells only R3 the network is not accessible. R3 updates R2 and R2 updates R1.
Question 4:
Why would RIP be used rather than static routes on R1, R2, R3, and R4?
A – RIP creates more accurate than static routes.
B – RIP uses less network resources than do static routes.
C – RIP is supported by more different vendors equipment than static routes.
D – RIP requires less configuration to automatically adjust when links go down than static routes.
Question 5:
On which router should a static route be configured?
A – on the ISP router
B – on R1
C – on R2
D – on R3
E – on R4
Answer 1: B
Answer 2: C
Answer 3: B
Answer 4: D
Answer 5: A
