Hand Tools Self Test Q Flashcards
Questions only from self test part of the book in the end of the module.
List three (3) uses of a circumference ruler.
Used to find circumferences, measure and scribe straight or curved lines on metal.
Explain why the hook on the end of a flexible tape rule should be movable.
The hook end should be movable to allow for accurate inside and outside measurments.
The long part of a steel square is called the ___ and the shorter part is called the ___.
body|tongue
What tool would you use to scribe an arc or circle larger than 42”?
trammel points
A good tool for accurately. transferring measurements is a?
set of dividers
What way do green handled aviation snips cut?
From left to right (clockwise).
What is the advantage of combination snips over straight snips?
Combination snips have a cutting blade that curves away from the cutting edge. The removal of part of the blade allows the metal to roll over the blade easier which enables you to cut smaller radius curves.
A 32 tip hacksaw blade is the best choice for cutting?
Thin stock
It is dangerous to use chisels that have ___?
mushroomed head
What punch is used to transfer patterns onto sheet metal?
Prick punch
What is the purpose of the wedge when replacing a hammer handle?
A wedge is used to tighten the end of the handle in the eye of the hammerhead.
The size of pliers is determined by the ___.
overall length of the tool
Vise grips have an advantage over pliers when ___.
you need to maintain a constant pressure
Using clamps when working around power tools or equipment can substantially enhance ___ and ___.
safety|accuracy
What is the first thing you should consider when selecting a screwdriver for a particular job?
Screwdrivers tip should fit the screw head in shape and size.
