GT & T QUIZ Flashcards
what does RFS mean
regardless of feature size.
datum A is used for?
largest mating surface.
What does position control?
features of size
What does location control?
Features without size
what is MMC used for
It is used for clearance holes.
What does DRF mean
datum reference frame.
what is in the first box
characteristic symbol
what is first in the second box
shape of tolerance zone.
datum feature is?
the part itself.
datum plane is?
The imaginary plane that sits on the surface.
T or F
Rule #1 requires perfect form of a feature at LMC
F
it requires perfect form at MMC
T or F
Form tolerances always use datums
F
T or F
The tolerance in the feature control fame is always a total tolerance and never a plus/minus value.
T
T or F
Feature modifiers can only be used with features of size
T
T or F
Limits of size do not control the orientation relationship between individual features on a part.
T
rule #1 no relation between features.
If a MMC modifier appears in a feature control frame, the size of the tolerance zone will increase by the same amount as the hole gets smaller and smaller.
F
the hole would get bigger and bigger.
DRF is the abbreviation for datum reference feature.
F
Datum Reference Frame
Position tolerance is used to locate features of size and without size?
F
it only controls features of size
when LMC or MMC is applied to a hole pattern, each hole may have a different position tolerance depending on the actual size of each hole.
T
what is the latest AMERICAN national standard on dimensioning and tolerancing.
ASME Y14.5-2009
which of the following is NOT a feature? pin hole slot surface axis tab
axis
a feature is sometnig you can grab
which 2 of the flowing are NOT features of size. hole 2 opposed surfaces individual surface 2 unopposed surfaces spherical surface cylindrical surface
2 unopposed surfaces
individual surface
what is found in the first compartment of a feature control frame.
Geometric Characteristic
what is used to cualify a primary datum
flatness.