General Specs Flashcards
Hull type
Deep-V, rigid monohull with a foam
collar enclosed in a polyurethane sheath
Hull material
5086 Marine grade aluminum
Hull is welded with ___
Metal Inert Gas (MIG) or Tungsten Inert Gas (TIG)
The collar is manufactured from ___
Closed cell high density foam enclosed in an
ultraviolet (UV) resistant polyurethane sheath that is reinforced with a woven
polyester base cloth
Length at waterline
26’ 2”
Maximum length of boat in water (bow to end of taff rail)
31’ 7”
Length overall on trailer (front of trailer coupler to end of taff rail)
36’ 10”
Maximum length of boat on trailer (trailer coupler to skeg on outboard lower unit, engines trimmed up)
38’ 1”
Beam overall
8’ 5” including collar
Offset for transducer (to bottom of lowered outboard)
18”
Operational Draft (dead-in-the-water (DIW) with engines vertical)
2’ 9”
Minimum draft (DIW with engines raised)
1’ 10”
Highest point above waterline (mast platform up: searchlight)
9’ 10”
Highest fixed point above waterline (mast platform down: cabin top)
7’ 10”
Highest point when on trailer (mast platform up)
12’ 6”
Highest point when on trailer (mast platform down)
10’ 6”