Garrett Engine Propeller System Flashcards

1
Q

TPE-331 is what kind of turbine engine?

A

Fixed-shaft

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

what moves the blades to low pitch and reverse pitch?

A

Oil pressure

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

what moves the blades to high pitch and feather position?

A

a combination of spring pressure and centrifugal force

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

what is incorporated into the propeller hub to prevent the blades from rotating into the feather position during shutdown?

A

retractable start latches or pitch stops

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

What does Negative-Torque-Sense (NTS) System do?

A

automatically increases propeller pitch whenever

negative torque exists

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

On A Garrett engine the negative torque signal (NTS) provides a signal which does what to the propeller blade angle to limit negative torque or prevent the propeller from back driving the engine?

A

The NTS drives the propeller to coarse pitch to slow the propeller down and reduce the negative torque on the engine.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

engine power output is controlled by the?

A

Fuel Control Unit

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

propeller blade angle is controlled by?

A

Prop Governor

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

power lever four positions

A

Reverse, Ground Idle, Flight Idle, Maximum

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the function of the power lever during flight?

A

to directly adjust the fuel control unit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What is the function of the power lever during Ground operations?

A

bypasses the propeller governor and directly controls propeller blade angle through the propeller pitch control unit.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

The primary function of the condition lever

A

to control engine speed and to manually shut off the fuel and feather the prop

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

3 position of the condition lever

A

Cutoff, low RPM, and high RPM

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

How does the primary and underspeed governor connected to the conditon lever?

A

Through a mechanical linkage

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

When the pilot starts the engine under normal start conditions on an aircraft equipped with Garrett engines what must the pilot due to obtain full propeller pitch authority?

A

The pilot must select reverse pitch to allow the pitch stops to retract to gain full propeller pitch authority.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

On an aircraft equipped with Garrett direct drive engines when the pilot moves the fuel condition lever to high rpm and the power lever is set to flight idle what unit controls the propeller pitch?

A

The propeller governor is now in the governing mode and controls the propeller pitch.

17
Q

Which lever controls the propeller pitch in the Beta or ground mode on the Garrett engine?

A

Power lever

18
Q

Which unit is responsible for producing boosted oil pressure to the propeller hub during Beta mode on a Garrett engine?

A

The propeller governor boosts oil pressure and supplies it to the PPC which controls the oil flow to the propeller hub through the Beta tube.