Frankston Line Flashcards
What are the terminating locations for FKN?
Caulfield
Glen Huntley
Moorabin
Cheltenham
Mordialloc
Bon beach
Carrum
Kananook
Frankston
Speeds on FKN line?
RMD-SYA 80
SYA-HKN 60
HKN-CAR 80
CAR-FKN 95
CFD through line speed?
40
CFD through holding road speed?
25
Kananook bypass and was road speed outside train gates?
40
Kananook bypass and was road speed inside train gates?
15
Safe working systems on FKN line?
ABS
ABS BI directional for center track between CFD AND MBN
Stabling locations on FKN line?
CFD
Mordialloc
Kananook
Frankston
Controlling signaller between FSS -RMD?
Caulfield signal control panel at Metrol
Controlling signallers on FKN line?
CFD— CHELTENHAM = Kananook-moorabin panel
Mordialloc - Kananook = Kananook
Frankston = Frankston
Do you use high beams on FKN line?
No
If there is a failure of points at CFD, what will the signaller do?
Arrange for the points to be manually operated by a competent worker who may hand deliver caution orders
Where does CFD station limits extend to?
Up to Glen Huntley
On the DOWN, what type of route indicators are used on the APPROACH to CFD?
Illuminated arrow
-up arrow = plat 2
-right arrow= plat 1
What route indicators are used AT CFD on the down?
Letter type
Plat 1 - C. center line
A. A siding
T. Through siding
Plat 2 -
C
A
T
D. Down line
How do you terminate at CFD?
Up and down=
Arrive plat 1 or 2
Change ends on plat
Receive proceed aspect
How many roads at CFD for stabling?
2 roads-
.Siding A holds 1 six car train (EMY ONLY)
.
Through holding road ( not permitted to stable in through holding road )
How many roads at Kananook and how many trains can they hold
14 stabling roads
1-8 hold 2 six car trains
9-14 hold 1 six car train
15 and 16 are maintenance roads
Only 1-12 are currently operational
Can trains with passengers be routed via the through holding road at CFD?
No
Special instructions for the home signal at Glen Huntley?
Home signal does not protect points but still requires and signallers caution order if signal is defective
How do you terminate at Glen Huntly?
Down, arrive plat 2
Change ends
Take signal
Up, arrive plat 2
Change ends
Take signal
Who controls the points and signals at Moorabin?
The signaller at Kananook-moorabin panel remotely controls these points and signals
How do you terminate at Moorabin?
Up, arrive plat 2
Change ends on plat
Take signal to down line
Down, arrive plat 1or2
Change ends on plat
Take signal for up or centre line
How do you terminate at Cheltenham?
Down only, arrive plat 2.
(A illuminated letter C must be displayed to arrive into plat 2)
Change ends on plat
Take signal
How do you terminate at Mordialloc?
Down,
Arrive plat 1 or 2
Change ends on plat
Take signal
Up,
Arrive plat 1
Change ends on plat
Take signal
How many roads at Mordialloc for stabling?
4, numbered 3 4 5 and 6
Each holds 1 six car train
Between Aspendale and BonBeach what is special about the signals?
There are controlled home signals between here that are not within station limits.
Kananook remotely controls these.
Verbal authority will be issued to the driver if the home signal is defective between aspendale and BonBeach
How do you terminate at Carrum?
Down only , arrive plat 2
Change ends on plat
Take signal
How do you terminate at Kananook?
Down, arrive plat 2
Change ends on plat
Take signal
Up, receive D route indicator and arrive plat 2
Change ends on plat
Take signal
How many roads at Frankston?
5 roads,
B siding is located to the north of station and holds 2 six car trains
Sidings 4,5,6, and A hold 1 six car train each
How do you terminate at Frankston ?
Arrive into plat 1 or 2
Change ends
Take signal
Do we do points anywhere in Frankston line?
No
What are the stabling locations for Frankston line?
Caulfield (emy)
Mordialloc
Kananook
Frankston
How do you terminate at Bon Beach
Up only,
Arrive plat 1
Change ends on plat
Take signal
