FO & Shared Flows Flashcards
CDU Departure T
- INIT REF
- RTE
- DEP/ARR
- PROG
- RTE
- LEGS
- NAV/RAD
- INIT REF
Before Start - FO
CDU-SET
DRS Synoptic - push
External Power - Verify
HYD Dem Pumps - 4 AUX, 1,2,3 AUTO
Fuel Pumps - ON
Beacon - BOTH
RCL/CANC - Push
Transponder - Set
Before Start Checklist - Do
Before Start - CA
CDU-SET
Trim-SET
BEFORE START Checklist - Call
Engine Start Flow - FO
ENG synoptic - Push
PACKS - Set
Engine Start Switches - Pull
Engine Start Flow - CA
START ENGINE(s) - Call
FUEL CONTROL switches - RUN
Before Taxi Flow - FO
APU Selector - As Needed
HYD DEM pumps - AUTO
NACELLE - Anti-ice as required
AFT CARGO HEAT - ON
Packs - Norm
- - Ground Equipment - Clear R - -
Flap Lever - SET
- - Observe Flight Control Check - -
Stat - Push
RCL - Push
BEFORE TAXI Checklist - Do
Before Taxi Flow - CA
Ground Equipment - Clear L
Call “FLAPS __ “
Flight Controls - CHECK
BEFORE TAXI Checklist - CALL
Taxi-Out Procedure FO
ATC Taxi Clearance Obtain
Salute
Parking Break-Release
Taxi-Out Procedure CA
Salute
Parking Brake - Release
BEFORE TAKEOFF PROCEDURE - PM
- Cabin - Notify cabin crew to prepare for takeoff, verify cabin is secure
- WXR or TERR - Select as needed
- Trim - Verify (If stab trim has blanked or changed & delete CG value, re-enter correct CG)
- BEFORE TAKEOFF Checklist - Read
BEFORE TAKEOFF PROCEDURE - PF
- Briefing - Update any changes to the takeoff briefing as needed
- WXR or TERR - Select As Needed
- BEFORE TAKEOFF CHECKLIST - Call
TAKEOFF PROCEDURE - PM
Before Entering Departure Runway- Verify
* Runway (outside rwy sign and ND)
* Runway entry point correct
* Verify first fix
TAKEOFF PROCEDURE - PF
Before Entering Departure Runway- Verify
* Runway (outside rwy sign and ND)
* Runway entry point correct
* Verify first fix
Cleared on the active departure runway - PM
- Exterior Light - All, except landing lights
- Transponder - TA/RA
Align AIrplane with runway - Veirfy heading agrees with runway heading
Cleared for takeoff - Exterior LIghts All ON
Cleared on the active departure runway - PF
Align airplane with runway
Verify heading agrees with assigned heading
Cleared for takeoff
Brakes - Released
After Takeoff Flow - PM
After Flap Retraction is Complete
NACELLE anti-ice - AUTO/SET
Packs - Verify
Gear Lever - Off
AFTER TAKEOFF Checklist - DO
After Takeoff Flow - PF
Call “Flaps __ “ on schedule
After Flap Retratction is Complete
AFTER TAKEOFF Checklist - CALL
Arrival “Y” CDU
1)DEP/ARR
2)LEGS
3)NAV RAD
4)INIT REF
Descent Flow - PM
ATIS (Either Pilot) - Obtain
RCL/CANC - PUSH / READ
Landing Assessment - Obtain
Autobrakes - SET
CDU - Program & SET
EFIS Control - SET
DESCENT Checklist - DO
Descent Flow - PF
ATIS - Obtain
Recall - Request
CDU - Verify
EFIS Control - SET
Approach Briefs -Complete
DESCENT Checklist - Call
After Landing Flow - PM
Clear of Active Runway
APU - As Required
NACELLE Anti-ice - As Required
Exterior Lights - SET
WXR - OFF
AUTOBRAKES - OFF
Flaps - UP
Transponder - As Needed
After Landing Flow - CA / PF
Captain-SPEEDBRAKE DOWN
Pilot Flying:
WXR - OFF
Shutdown Flow - FO
Electrical Power - EXT/APU#1
HYD DEM Pumps - 4 Aux, 1,2,3 OFF
after FUEL CONTROL switches to CUTOFF
SEATBELTS - OFF
Fuel Pump Switches - OFF
NACELLE / WING Anti-ice - AUTO
Beacon - OFF
F/D Switch - OFF
STAT - PUSH
Transponder - STBY
after Park Brake released
HYD DEM Pump 4 - OFF
APU Selector - As Needed
Shutdown Flow - CA
After HYD DEM Pumps Set
FUEL CONTROL Switches - CUTOFF
F/D Switch - OFF
Chocks are verified
Park Brake - Release
