Flight Insturments Flashcards
The Air Data System (ADS) consists of two ______, two ______, one __________, two ________ probes and four ____________
ADCs
Pitot Tubes
Pitot Static Tubes
TAT
Static ports
The standby instruments include the following:
_____________
_____________
ISIS
Magnetic Compass
The #3 Pitot/Static tube provides static pressure to the:
___________
___________
Cabin Pressure Acquisition Module (CPAM)
ISIS
An amber colored _______ 1 or 2 appears on the PFD when only one ADC is supplying both the captain’s and first officer’s instruments
ADC
An amber _______ message displayed on the airspeed tape indicates a difference of ______ KIAS or more between airspeed indications
IAS
5
In the event of a radio altimeter failure, the radio altitude digits will be replaced by an amber ____ label inside an amber box
RA
If the acceleration trend vector exceeds Vmo or Mmo, the digits in the airspeed window and the digital Mach readout are displayed in:
A) Red
B) Amber
C) Magenta
D) Cyan
B) Amber
The __________ airspeed trend vector represents the airspee which the aircraft will attain in ____ seconds and is disabled during takeoff .
Magenta
10
The altitude trend vector represents the altitude which the aircraft will attain in ___ seconds
6
In the event of an Air Data Computer failure, the respective PFD will reflect a ___________ on the airspeed and altitude tapes and the vertical speed indicator information will be replaced by a ______.
Red “X”
Red “V/S”
The #1 Air Data Computer is supplied by the #1 pitot tube and static ports ______ while the #2 Air Data Computer is supplied by the # _____ pitot tube and static ports ________.
1
1&4
2
2&3
An amber “ALT” will be displayed on the PFD with a difference of ______ feet between altitude indicators.
A) 150
B) 200
C) 250
D) 300
B) 200
Aircraft data is recorded by the ________ when the red beacon switch is _____ or when the aircraft is __________
DFDR
On
Airborne
The decision height is set using the ___ knob located on the _________ panel
DH
Display control
At radio altitudes below or equal to the decision height setting, a ____ label is displayed inside a box flashing for _____ seconds and then becoming steady.
MIN
10
