Flight Instruments Flashcards
With APP annunciated the Integrated Standby Flight Display (ISFD) displays _____ deviation data.
GS and LOC
The PFD automatically displays on the _____ if the Outboard Display Unit (DU) fails.
Inboard DU
The Primary Flight Display (PFD) shows _____. (3 things)
ILS information, approach minimums, TCAS avoidance Pitch Commands
The Speed Bug (magenta hollow arrow) indicated a/an _____.
manually selected MCP speed or FMC computed speed (IAS/MACH window blank)
The Maximum (Vmax) Speed is indicated by _____.
the bottom of the red and black alternating hash marks forming a vertical bar in the upper portion of the airspeed tape.
The Maximum Maneuvering Speed in indicated by _____.
the bottom of the amber bar in the upper portion of the airspeed tape.
The Maximum Maneuvering Speed (Vmvr) for full maneuver capability is indicated by _____.
the top of the amber bar in the lower portion of the airspeed tape.
The Minimum Safe Operating Speed (Vmin) is indicated by _____.
the top of the red and black alternating hash marks forming a vertical bar in the lower portion of the airspeed tape.
_____ to silence the Mach/Airspeed Overspeed Warning clacker.
Reduce airspeed below Vmo/Mmo
The Pitch Limit Indication (PLI) indicates _____.
Pitch Limit (stick shaker activation) as calculated by SMYD
On approach at destination the amber crosshatched area shows the _____.
FMC landing altitude for destination runway or airport.
The triangular pointer and line (green) on the Altitude Display shows Minimums in feet _____ with Minimums reference indicator on EFIS panel set to _____.
MSL/ BARO
The ______ appears on the attitude indicator _____.
Radio Altitude/ below 2500 ft AGL
Altitude Disagree Alert appears if the CA and FO altitude indications disagree by more than _____ feet for more than 5 continuos seconds.
200
The current heading is indicated _____
under the Current Heading Pointer triangle (white)
Use the CDU legs page STEP prompt to step through the active route on the ND in _____ mode.
PLN
EFIS MODE/NAV FREQ DISAGREE (amber) indicates _____ (2 answers)
APP is selected with a VOR tuned
VOR is selected with ILS tuned
Enter the runway _____ using the RWY key on the HGS Control Panel.
length and elevation
RO CTN (amber) on the HGS Digital Annunciator Panel indicates _____.
loss of rollout guidance below 500 ft AGL.
DISPLAY CONTROL PANEL (amber) indicates _____.
a failed EFIS Control Panel on the affected side.
INSTR SWITCH (amber) indicates _____.
both the Captain’s and First Officer’s displays are using the same source of IRU data.
CDS MAINT (white) indicates _____.
a dispatchable CDS fault has occurred.
CDS FAULT (amber) indicates _____.
a non-dispatchable CDS fault has occurred.
DSPLY SOURCE (amber) indicates _____.
a DEU has failed.