Flight Instruments

Question 1

Indicated airspeed, altitude, and vertical speed are provide by the

Answer 1

ADS

Question 2

Attitude and heading information are provided by the

Answer 2

AHRS (or IRS depending upon aircraft configuration)

Question 3

In case of a PFD display failure, the PDF, information may be presented on the

Answer 3

MFD

Question 4

What are the five system pages that are available on the MFD

Answer 4

Fuel, Electrical, Environmental and ice protection, Hydraulic and brakes, Take off

Question 5

The MFD _ page provides takeoff temperature settings, oil level, and doors status

Answer 5

takeoff

Question 6

The air data source annunciation, ADC 1 or ADC 2 is presented in a(n) _ color when only one ADC is supplying both sides

Answer 6

Amber

Question 7

The airspeed trend vector represents the airspeed that the airplane would attain in _ seconds

Answer 7

10

Question 8

An amber ALT will be displayed on the PFDs in case of a difference of _ft or more between the altitude indications on the PFDs

Answer 8

200

Question 9

The altitude trend vector represents the altitude that the airplane should attain in _ seconds if the current altitude rate (Vertical speed) is maintained

Answer 9

6

Question 10

The primary flight Instruments are presented on the

Answer 10

PFD

Question 11

Reference speed bugs that are displayed on the airspeed indicators may be out of view, if airspeed is reduced below_ KIAS followed by an increase above _ KIAS

Answer 11

230
230

Question 12

The decision height setting is provided through the decision height setting knob on the

Answer 12

Display control panel

Question 13

When the _ indicates a warning condition, PULL UP is displayed boxed in the upper right corner of the ADI sphere

Answer 13

EGPWS