Flight Control Panel/landing gear lever Flashcards
FLIGHT CONTROL PANEL
flight control switches
ON (guarded position)
Normal position
Opens flight control shutoff valve to
- aileron
- elevator
- elevator feel
- rudder
FLIGHT CONTROL PANEL
Flight control switches
STBY RUD
Closes flight control shutoff valve, isolating
- aileron
- elevator
- elevator feel
- rudder
Activates sby pump
- low pressure light will blink, then extinguish when sby rudder SOV opens
- pressurises sby rudder PCU
Illuminates STBY RUD ON light
Thrust reversers powered by sby hydraulics if necessary
Yaw damper can be re-engaged, activating sby yaw damper if both FLT CONTROL switches to SBY RUD
FLIGHT CONTROL PANEL
LOW PRESSURE lights (A and B (amber)
Low hydraulic pressure to corresponding flight control units
- <1300psi to elevator aileron & rudder
Extinguishes when FLT CONTROL switch moved to STBY RUD and sby rudder SOV opens
-light function changes to sby rud SOV position indicator
FLIGHT CONTROL PANEL
SPOILER switches (A and B) ON/OFF
ON (guarded position)
-hyd pressure to flt spoilers locking them down
OFF
-closes A/B spoiler SOV cutting hyd pressure to A/B powered flight spoilers
-ground spoilers not affected
FLIGHT CONTROL PANEL
YAW DAMPER light (amber)
Yaw damper not engaged or inop
-losing B hyd pressure does not cause light to come on but aye damper is inop.
FLIGHT CONTROL PANEL
YAW DAMPER switch
OFF
Yaw damper disengaged. Light illuminated
Solenoid released to OFF
- B FLT CONTROL switch OFF position
- power interruption to #1 transfer bus >2 sec
- yaw damper rate gyro or actuator fail
FLIGHT CONTROL PANEL
YAW DAMPER switch
ON
Primary yaw damper engaged if B FLT CONTROL switch is ON
engages sby yaw damper to sby rudder PCU if both A and B FLT CONTROL switches are in the sby rudder position
FLIGHT CONTROL PANEL
SBY HYD lights (amber)
LOW QUANTITY light
Always armed
Illuminates at approx 50%
Leak in sby system will empty sby system and take B sys to 72%
FLIGHT CONTROL PANEL
SBY HYD lights (amber)
LOW PRESSURE light
Armed with sby pump on or when automatic sby function activated
Indicates low output pressure of electric motor driven sby pump <1300psi
FLIGHT CONTROL PANEL
SBY HYD lights (amber)
STBY RUD ON light
Illuminated when sby rudder PCU is pressurised
FLIGHT CONTROL PANEL
ALTERNATE FLAPS switch
OFF (guarded)
Normal position
Closes LE sby SOV
FLIGHT CONTROL PANEL
ALTERNATE FLAPS switch
ARM
arms sby hydraulic LOW PRESSURE light
Starts sby pump
Arms alternate flaps control switch
TE flap bypass valve goes to bypass position to prevent hyd lock of the flap drive
Disables LE UCM (un-commanded) function
FLIGHT CONTROL PANEL
ALTERNATE FLAPS CONTROL switch
Limitations
Max 230kts to begin extension
Functions only when ALTERNATE FLAPS switch in ARM
Allow 15 seconds after releasing the position switch to avoid damage to the altn flaps motor clutch
After a complete extend/terrace cycle allow 5 mins for cooling before attempting another extension
FLIGHT CONTROL PANEL
ALTERNATE FLAPS control switch
DOWN
Momentarily
- opens LE sby SOV
- fully extends all LE devices using sby hydraulic pressure
- 30sec LE flaps
- 1min LE slats
Held down
- extends TE flaps electrically
- takes 2min 0°-15°
FLIGHT CONTROL PANEL
ALTERNATE FLAPS control switch
UP
Retracts TE flaps electrically
LE devices remain extended and cannot be retracted by the alternate flaps system
FLIGHT CONTROL PANEL
FEEL DIFF PRESS light (amber)
Illuminates with a 25% difference in pressure in the elevator feel computer
Possibly lost A or B hydraulics or elevator feel pitot system may have failed
FLIGHT CONTROL PANEL
SPEED TRIM FAIL light (amber)
Failure of both FCC (flight control computer) speed trim functions
Illuminates on recall
-failure of single FCC channel
FLIGHT CONTROL PANEL
MACH TRIM FAIL light (amber)
Dual channel light- illuminated indicates failure of both Mach trim functions in FCC (flight control computer)
illuminates on recall
-single FCC channel fail
Both channels failed do not exceed 280kts/.82 Mach
FLIGHT CONTROL PANEL
AUTO SLAT FAIL light (amber)
Dual channel
Illuminated indicates failure of both autoslat channels of SMYD (stall management yaw damper)
On recall
-single SMYD failure
Mach Trim system description
Provides automatic positioning of the elevators as a function of Mach number.
Counteracts tuckunder (nose down at high speeds)
- downwash behind wing decreases, increasing AOA of horizontal stabiliser
- center of pressure moves aft as speed increases
System armed above M .615
Operates with or without autopilot
Auto slat system description
Slats go from EXT to FULL EXT providing a additional lift at high angles of attack (near stall)
Retract from FULL EXT to EXT when angle of attack reduced
LE FLAP TRANSIT light inhibited with autoslat extend
Works only with flap 1, 2 or 5
SFP- F1-25
Uses hyd B system
-if pressure is low PTU provides pressure from A sys and fluid from B system
FLIGHT CONTROL PANEL
Flight control switches
OFF
Closes flight control shutoff valve
Corresponding hydraulic system pressure is isolated from
- aileron
- elevator
- elevator feel
- rudder
Yaw damper switch flips off when sys B switch is placed OFF
Illuminates respective:
- LOW PRESSURE light
- FEEL DIFF PRESS light
LANDING GEAR LEVER
Landing gear lights (RED) are illuminated when?
PHOTO
LANDING GEAR LEVER
- related landing gear is in disagreement with LANDING GEAR lever position (in transit or unsafe)
- landing gear is not down and locked (with either or both thrust levers at idle, below 800ft)
Speed trim system description
- Improves flight characteristics during ops with low gross weight, aft CofG and high thrust with autopilot disengaged.
- Commands stabilizer in direction opposite to the speed change to help return the aircraft to the trimmed speed.
- Fully enabled between 100kts-M0.60 with fadeout to zero by M.068
- Operates 10s after takeoff, 5 seconds following release of trim switches, A/P not engaged