Finals Flashcards
Plans to be submitted
6
Plans to be retained by authority
1
Set to be returned to applicant
2
Set to be returned to owner
2
Set to be kept in job site
1
Exp of permit if wirk is not commenced
1yr
Exp of permit if work is abandoned or…
120 days
Peecentage of original fee for renewal
50%
Request insoection for existing equip
Not more 72 hrs
Req for inspection shall be filed before inspextion intended
3 working days
Branch interval which corresponds to a story height shall mot be less than
2.43m
Brazed joints melt temperature higher than
449°c
Distanxe if vuilding sewer fron ofb
.6m
Confined space is a room having less than
1.4cu.m
Equivalent to liters per m
28.3lpm
Ine fixture unit to gallons per m
7.48gals
Minimum capacity of grease interceptor
3 cu.m
Nber ofntraps s3rved by a unit vent
2
Sloper for horuzontal drain pipe
2
Slope for horizontal drainage piping 102mm
1%
Min depth of building sewer below fin ground level
0.30m
Max spacing for vertical copper tubing
3m
Maximum spacing of vertical support for lead pipes
1.2
Intervals of vertical support for plastic pipe
1m
Interval of horizontal support for CISP exceeding 1.5m
3m
Support for cast iron soil pipes shall be placed within
0.45m
Intervals of horizontal supports for screwed pipes 19mm
3m
Intervals of horizontal support for screwed pipes 25mm and larger
3.6m
Intervals of horizontal supports for copper tubing 38mm and smaller
1.8m
Intervals of horizontal support for copper tubing 51mm and larger
3m
