Final Exam Flashcards
OSHA requires, as listed in subpart “D” - walking and working surfaces - that all passageways, storerooms, and service rooms shall be kept clean and orderly, and in a ______ condition (workable, well ventilated, sanitary, pristine)
Sanitary
OSHA regulations require that all ladders must be inspected: (monthly, weekly, daily, frequently)
Frequently
PSI, according to 1910.119, stands for: (pounds per square inch, process safety instructions, process safety information, none of the above)
Process Safety Information
Where are YOU in the responsibility triangle?
In the center
HAZCOM stands for: (Hazard Container Mitigation, Hazard Council Meeting, Hazard Communication, None of the above)
Hazard Communication
A business that ONLY warehouses chemicals is exempt from performing a hazard determination. (T/F)
True
A “C” adjacent to a value in Table Z-1 in 1910.1001 (a) indicates: (concentration, ceiling, commodity, none of the above)
Ceiling
Under 1910.1200, all chemical manufacturers, importers, or distributors:
a) must ensure that all containers do not leak
b) supply their respective customers with proper bills of lading
c) shall ensure each container of hazardous chemicals leaving the workplace is properly labeled, tagged, or marked
d) all of the above
c) shall ensure each container of hazardous chemicals leaving the workplace is properly labeled, tagged, or marked
A HAZCOM program, in compliance with 1910.1200(h) shall provide all employees with effective information and training on hazardous chemicals in their work area program at the time of their ______ assignment and whenever a new _______ hazard the employees have not previously been trained is introduced into their work area.
(initial/physical, normal/chemical, initial/chemical, none of the above)
initial/chemical
Subpart Z - toxic and hazardous substances, limits employee exposure to an substances listed in tables Z1, Z2, or Z3. Exposure limitations shall be met by providing all affected employees with appropriate _____ if ______ or _______ controls do not achieve full compliance.
a) safety glasses, procedural, engineering
b) FRC, fire suppression, removal of chemicals
c) PPE, administrative, engineering
d) none of the above
c) PPE, administrative, engineering
Trade Secrets allows any employee to request the identity of a trade secret. (T/F)
False
Where complex mixture have similar hazards and ingredients, the chemical manufacturer, etc, may prepare only one SDS (T/F)
True
What mark shall be used to indicate no relevant information on an SDS?
a) leave it blank
b) a dash
c) NA
d) any of the above
c) NA
What does HEPA stand for?
High Efficiency Particulate Arresting
The term “fiber” in 1910.1001(a)(2) is only used to describe the physical requirements necessary to designate a fiber as asbestos. (T/F)
True
- 1001(j)(2) requires employers, building owners, and facility owners to determine the _____, _____, and _____ of ACM or PACM at a work site.
a) length, width, and height
b) presence, location, and quantity
c) age, color, and quantity
d) none of the above
b) presence, location, and quantity
- 1001(j)(3) requires that ____ signs be displayed at each _____ area.
a) danger, protected
b) danger, regulated
c) warning, regulated
d) warning, protected
c) warning, regulated
Label specifications requires that the wording on required labels _____ include the words CONTAINS ASBESTOS FIBERS.
a) should
b) can
c) must
d) none of the above
c) must
ACM stands for _____
Asbestos Containing Material
One management requirement under subpart “Q” is to ____ a welding and burning supervisor.
a) suggest
b) promote
c) designate
d) none of the above
c) designate
There are 11 different designations for powered industrial trucks or tractors. The 4 major ones are
a) D, G, E, & Y
b) G, D, LP, & E
c) A, B, C, D
d) none
b) G, D, LP, & E
A fire watch shall be employed whenever welding or cutting is performed in locations where other than a minor fire might develop (T/F)
True