Final Flashcards
What is the first and foremost function of any lighting designer?
Visibility
What color is produced when you combine red and green light?
Amber
What color is produced when you combine blue and green light?
Cyan
What color is produced when you combine red and blue light?
Magenta
What color is produced when you combine all the Primary colors of lighting?
White light
What color is produced when you combine all the Secondary colors of lighting?
Black
Which function of lighting gives reason to a scene?
Visibility
This function of light defines objects or areas of the scene in relation to their importance to the scene.
Placing the action
This function of light conveys the feeling or tone within a scene.
Creating the mood
The following quality of light shows range of brightness used in a scene
Intensity
The following quality of light range of hues and tints chosen to modify the light projected
Color
The following quality of light variety and contrasts in both intensity and color used
throughout the scene
Distribution
The following quality of light shows any change in intensity, color, or form directing attention to a desired place
Movement
What is the medium use to produce color with the light is made of acetate
Gel
The amount of light that passes through a colored gel is known as the ______________.
Transmission Rate
This fixture produces a bright and concentrated beam of light over a long throw distance. It is primarily used to follow the movements of an actor on stage.
Follow Spot
What is the first thing you should do when working to fix a broken lighting instrument?
Turn off and Unplug
.If you shine a blue light on a red costume what color would the costume be?
Black
Define the barrel
The part of the lighting instrument casing that holds the lenses.
Define the shutters
A device that allows light to pass through or blocks them out.
What do you have to remember when using the shutters?
Make sure to open them if you want the light to pass through.
If what to cut the light off the downstage edge of the stage, which shutter would you use?
Top shutter
What are the real dimensions of a 1x4
¾ by 3 1/2
What are the real dimensions of a 2x4
1 ½ by 3 1/2
What are the 3 types of fire extinguishers?
A, B, C
What does an A extinguisher put out?
A fire caused by wood
What does a B extinguisher put out?
A fire caused by Chemicals/liquids
What does a C extinguisher put out?
Electrical Fires
The parts of a flat are…
Left Stile
Right Stile
Toggle Rail
Bottom Rail
Top Rail
Corner blocks
Keystones
Cross Hatching
Panning with an x pattern
Scumbling
Use 2 or more different colors but not trying to blend them in too much, adding random colors to blend the paint together.
Wet Blending
Taking 2 colors that are wet and blending them together but not too much.
Spattering
Let excess paint run off of the paintbrush and hit it on your hand to get little dots on your poster.
The place where the audience sits during a play is called the _____________.
House
During a musical, the orchestra usually sits in the ________________________.
Pit
South High has what type of theatre?
Proscenium
_______________________is a huge curtain made of fire-resistant material that quickly seals off the entire proscenium opening in case of a fire onstage.
Fire curtain
The curtain that closes off almost the entire stage is called the ____________________.
Main/Act curtain
The area between the main curtain and the orchestra pit is called the __________.
Apron
A ___________ is a large canvas background that is the last curtain that is often white so it can be turned different colors just by shining different colors of light on it.
Cyc
The _____________is where the carpenters build the sets, and the scenic artists paint them.
Scene shop
The seats on the lowest level of audience seating is referred to as the _____________.
Front of House/ FOH
__________________ is an imaginary or real line that divides the stage area into two equal parts, running from downstage to upstage.
Plaster line
When marking the piece of lumber, Which side should the X go on?
The part you are not going to cut
Never ____________the moving parts such as blades, bits, cutters and others.
touch
Use common _____________.
Sense
Don’t leave the tool until it comes to a complete _______.
Stop
Use safety __________ when working with power tools
Glasses
Use ___________ sense.
Common
The work area should be well ______.
Lit
Stop operation _______________ if any abnormality is detected.
Immediately
Do not attempt to remove cut material when the blade is ________________.
Moving
