FASTENERS Flashcards
A device with head on one end of a shank or body and a thread on the other end designed to mate with a tapped nut.
a. Screw
b. Bolt
c. Stud
d. None of the above
b. Bolt
It is a headed and threaded bolt used without a nut.
a. Screw
b. Bolt
c. Stud
d. None of the above
a. Screw
It is a fastener with no head but is has threads at both ends of the shank.
a. Screw
b. Bolt
c. Stud
d. None of the above
c. Stud
A fastener where tension is normally induced in the bolt to compress the assembly by rotating the nut.
a. Screw
b. Bolt
c. Stud
d. None of the above
b. Bolt
A fastener that is inserted into an internally tapped holed and tension is induced by rotation of the head.
a. Screw
b. Bolt
c. Stud
d. None of the above
a. Screw
It is a fastener like screw which is inserted in a tapped hole and a nut is used on the other end to create tension.
a. Screw
b. Bolt
c. Stud
d. None of the above
c. Stud
A fastener which is threaded in the entire length and a nut is used on both ends to create tension serving the function of a bolt.
a. Stud
b. Bolt
c. Stud bolt
d. All of the above
c. Stud bolt
A machine screw used for general purpose.
a. Hexagonal head
b. Hexagonal flange head
c. Pan head
d. None of the above
a. Hexagonal head
The type of set screw used for general purpose.
a. Slotted head
b. Square head
c. hexagon socket head
d. None of the above
b. Square head
The type of screw thread used for rotating machine members such as impeller shafts.
a. Right-hand tread
b. Left-hand thread
c. Square thread
d. None of the above
b. Left-hand thread
A type of screw thread used for almost all fastening applications.
a. Right-hand thread
b. Left-hand thread
c. Square thread
d. None of the above
a. Right-hand thread
A type of rivet used for fastening metal parts together when the reverse joint is not accessible or is too restricted.
a. Cold forged rivet
b. Semi-tubular rivets
c. Blind rivet
d. None of the above
c. Blind rivet
The diameter of a bolt is measured based on the ______
a. outside of the major diameter of the thread of the bolt.
b. diameter of head of the bolt
c. diameter of the shank
d. None of the above
a. outside of the major diameter of the thread of the bolt.
The length of the bolt is measured from _____
a. head length.
b. thread length.
c. under the head of the bolt to the
end of the bolt.
d. None of the above
c. under the head of the bolt to the
end of the bolt.
Which of the following is the style of bolt head?
a. Round countersunk
b. Round
c. Square
d. Hex
e. All of the above
f. Two of the above
e. All of the above
