explosive actuated tools Flashcards
what type of power load must be used in a low velocity tool and why?
A power load with a crimped end, the water in a high velocity one would become lodged
List the six load colours ranging from lowest strength to highest strength
1- grey 2-brown 3-green 4-yellow 5-red 6-purple
Why should power loads not be carried loosely in pockets
they can be set off and cause serious injury or death
What is a drive pin fastener used for
to permanently attach one material to another
What is a base material
The material the fastener shank is driven into
When doing a centre punch test if the fastener is blunted it means the material is to:
Hard
When doing a centre punch test the fastener penetrates easily the material is two:
Soft
When doing a centre punch test if the material cracks or shatters the material is two:
brittle
A threaded knurled pin is designed for what kind of material
mild steel
To be a qualified operator of an explosive actuated tool you must possess
training in the use of each tool and familiarity with the local safety regulations
Original states that operators of explosive actuated tools should always wear what
eye protection
If it all is found to be defective you should what
market defective and call a service representative
According to OH and S, what safety equipment is required when using an explosive actuated tool in confined space area
eye protection an ear protection
Who is responsible of an accident occurs as a result of an unattended explosive actuated tool
The operator
Shouldn’t explosive actuated tool be used in an explosive or flammable area
no
