Examtopics

Question 1

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named
Developers. Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Dev, you assign the Contributor role to the Developers group.
Does this meet the goal?

A. Yes
B. No

Answer 1

Correct Answer: A

The Contributor role can manage all resources (and add resources) in a Resource Group.

Question 2

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named
Developers. Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Subscription1, you assign the Logic App Operator role to the Developers group.
Does this meet the goal?

A. Yes
B. No

Answer 2

Correct Answer: B
You would need the Logic App Contributor role.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-securing-a-logic-app

Question 3

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named
Developers. Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Dev, you assign the Logic App Contributor role to the Developers group.
Does this meet the goal?

A. Yes
B. No

Answer 3

Correct Answer: A
The Logic App Contributor role lets you manage logic app, but not access to them. It provides access to view, edit, and update a logic app.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-securing-a-logic-app

Question 4

You have an Azure subscription named Subscription1 that contains an Azure Log Analytics workspace named Workspace1.
You need to view the error events from a table named Event.
Which query should you run in Workspace1?

A. Get-Event Event | where {$.EventType ““eq “error”}
B. Get-Event Event | where {$.EventType == “error”}
C. search in (Event) * | where EventType ““eq “error”
D. search in (Event) “error”
E. select *from Event where EventType == “error”
F. Event | where EventType is “error”

Answer 4

Correct Answer: D
To search a term in a specific table, add in (table-name) just after the search operator
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/search-queries https://docs.microsoft.com/en-us/azure/azure-monitor/log-query/get-started-portal

Question 5

You have an Azure subscription named Subscription1. Subscription1 contains the resource groups in the following table.
Name Region Policy
RG1 West Europe Policy1
RG2 North Europe Policy 2
RG3 France Central Policy 3
RG1 has a web app named WebApp1. WebApp1 is located in West Europe.
You move WebApp1 to RG2.
What is the effect of the move?
A. The App Service plan for WebApp1 moves to North Europe. Policy2 applies to WebApp1.
B. The App Service plan for WebApp1 remains in West Europe. Policy2 applies to WebApp1.
C. The App Service plan for WebApp1 moves to North Europe. Policy1 applies to WebApp1.
D. The App Service plan for WebApp1 remains in West Europe. Policy1 applies to WebApp1.

Answer 5

Correct Answer: B
You can move an app to another App Service plan, as long as the source plan and the target plan are in the same resource group and geographical region.
The region in which your app runs is the region of the App Service plan it’s in. However, you cannot change an App Service plan’s region.
References:
https://docs.microsoft.com/en-us/azure/app-service/app-service-plan-manage

Question 6

You have an Azure subscription that contains a resource group named RG1. RG1 contains 100 virtual machines.
Your company has three cost centers named Manufacturing, Sales, and Finance.
You need to associate each virtual machine to a specific cost center.
What should you do?

A. Configure locks for the virtual machine.
B. Add an extension to the virtual machines.
C. Assign tags to the virtual machines.
D. Modify the inventory settings of the virtual machine.

Answer 6

Correct Answer: C
References:
https://docs.microsoft.com/en-us/azure/billing/billing-getting-started https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags

Question 7

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Programmatic deployment.
Does this meet the goal?

A. Yes
B. No

Answer 7

Correct Answer: B

Question 8

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the Subscriptions blade, you select the subscription, and then click Resource providers.
Does this meet the goal?

A. Yes
B. No

Answer 8

Correct Answer: B

Question 9

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the RG1 blade, you click Automation script.
Does this meet the goal?

A. Yes
B. No

Answer 9

Correct Answer: B

Question 10

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Active Directory (Azure AD) tenant named Adatum and an Azure Subscription named Subscription1. Adatum contains a group named
Developers. Subscription1 contains a resource group named Dev.
You need to provide the Developers group with the ability to create Azure logic apps in the Dev resource group.
Solution: On Subscription1, you assign the DevTest Labs User role to the Developers group.
Does this meet the goal?

A. Yes
B. No

Answer 10

Correct Answer: B
DevTest Labs User role only lets you connect, start, restart, and shutdown virtual machines in your Azure DevTest Labs.
The Logic App Contributor role lets you manage logic app, but not access to them. It provides access to view, edit, and update a logic app.
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles https://docs.microsoft.com/en-us/azure/logic-apps/logic-apps-securing-a-logic-app

Question 11

You have an Azure Active Directory (Azure AD) tenant that contains 5,000 user accounts.
You create a new user account named AdminUser1.
You need to assign the User administrator administrative role to AdminUser1.
What should you do from the user account properties?

A. From the Directory role blade, modify the directory role.
B. From the Licenses blade, assign a new license.
C. From the Groups blade, invite the user account to a new group.

Answer 11

Correct Answer: A
Assign a role to a user -
1. Sign in to the Azure portal with an account that’s a global admin or privileged role admin for the directory.
2. Select Azure Active Directory, select Users, and then select a specific user from the list.
3. For the selected user, select Directory role, select Add role, and then pick the appropriate admin roles from the Directory roles list, such as Conditional access administrator.
4. Press Select to save.
References:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/active-directory-users-assign-role-azure-portal

Question 12

Your company has an Azure subscription named Subscription1.
The company also has two on-premises servers named Server1 and Server2 that run Windows Server 2016. Server1 is configured as a DNS server that has a primary DNS zone named adatum.com. Adatum.com contains 1,000 DNS records.
You manage Server1 and Subscription1 from Server2. Server2 has the following tools installed:
✑ The DNS Manager console
✑ Azure PowerShell
✑ Azure CLI 2.0
You need to move the adatum.com zone to Subscription1. The solution must minimize administrative effort.
What should you use?

A. the Azure portal
B. the DNS Manager console
C. Azure PowerShell
D. Azure CLI

Answer 12

Correct Answer: D
Azure DNS supports importing and exporting zone files by using the Azure command-line interface (CLI). Zone file import is not currently supported via Azure
PowerShell or the Azure portal.
References:
https://docs.microsoft.com/en-us/azure/dns/dns-import-export

Question 13

You have a resource group named RG1. RG1 contains an Azure Storage account named storageaccount1 and a virtual machine named VM1 that runs Windows
Server 2016. Storageaccount1 contains the disk files for VM1.
You apply a ReadOnly lock to RG1.
What can you do from the Azure portal?

A. Generate an automation script for RG1.
B. View the keys of storageaccount1.
C. Start VM1.
D. Upload a blob to storageaccount1.

Answer 13

Correct Answer: B
As an administrator, you may need to lock a subscription, resource group, or resource to prevent other users in your organization from accidentally deleting or modifying critical resources.
ReadOnly means authorized users can read a resource, but they can’t delete or update the resource. Applying this lock is similar to restricting all authorized users to the permissions granted by the Reader role.
Incorrect Answers:
C: A ReadOnly lock on a resource group that contains a virtual machine prevents all users from starting or restarting the virtual machine. These operations require a POST request.
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-lock-resources

Question 14

You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com that contains 100 user accounts.
You purchase 10 Azure AD Premium P2 licenses for the tenant.
You need to ensure that 10 users can use all the Azure AD Premium features.
What should you do?
A. From the Directory role blade of each user, modify the directory role.
B. From the Azure AD domain, add an enterprise application.
C. From the Groups blade of each user, invite the users to a group.
D. From the Licenses blade of Azure AD, assign a license.

Answer 14

Correct Answer: D
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/license-users-groups

Question 15

You have an Azure subscription.
You have 100 Azure virtual machines.
You need to quickly identify underutilized virtual machines that can have their service tier changed to a less expensive offering.
Which blade should you use?

A. Metrics
B. Monitor
C. Customer insights
D. Advisor

Answer 15

Correct Answer: D
Advisor helps you optimize and reduce your overall Azure spend by identifying idle and underutilized resources. You can get cost recommendations from the Cost tab on the Advisor dashboard.
Reference:
https://docs.microsoft.com/en-us/azure/advisor/advisor-cost-recommendations

Question 16

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription named Subscription1. Subscription1 contains a resource group named RG1. RG1 contains resources that were deployed by using templates.
You need to view the date and time when the resources were created in RG1.
Solution: From the RG1 blade, you click Deployments.
Does this meet the goal?

A. Yes
B. No

Answer 16

Correct Answer: A
From the RG1 blade, click Deployments. You see a history of deployment for the resource group.
Reference:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/templates/template-tutorial-create-first-template?tabs=azure-powershell

Question 17

You have an Azure subscription.
Users access the resources in the subscription from either home or from customer sites. From home, users must establish a point-to-site VPN to access the Azure resources. The users on the customer sites access the Azure resources by using site-to-site VPNs.
You have a line-of-business app named App1 that runs on several Azure virtual machine. The virtual machines run Windows Server 2016.
You need to ensure that the connections to App1 are spread across all the virtual machines.
What are two possible Azure services that you can use?

Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

A. an Azure Content Delivery Network (CDN)
B. an Azure Application Gateway
C. Traffic Manager
D. an internal load balancer
E. a public load balancer

Answer 17

B. an Azure Application Gateway

D. an internal load balancer

Question 18

You plan to use the Azure Import/Export service to copy files to a storage account.
Which two files should you create before you prepare the drives for the import job? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. a driveset CSV file
B. a JSON configuration file
C. a PowerShell PS1 file
D. an XML manifest file
E. a dataset CSV file

Answer 18

Correct Answer: AE
A: Modify the driveset.csv file in the root folder where the tool resides.
E: Modify the dataset.csv file in the root folder where the tool resides. Depending on whether you want to import a file or folder or both, add entries in the dataset.csv file
References:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-data-to-files

Question 19

You create an Azure Storage account named contosostorage.
You plan to create a file share named data.
Users need to map a drive to the data file share from home computers that run Windows 10.
Which outbound port should you open between the home computers and the data file share?

A. 80
B. 443
C. 445
D. 3389

Answer 19

Correct Answer: C
Ensure port 445 is open: The SMB protocol requires TCP port 445 to be open; connections will fail if port 445 is blocked.
References:
https://docs.microsoft.com/en-us/azure/storage/files/storage-how-to-use-files-windows

Question 20

You have two Azure virtual machines named VM1 and VM2. You have two Recovery Services vaults named RSV1 and RSV2.
VM2 is protected by RSV1.
You need to use RSV2 to protect VM2.
What should you do first?

A. From the VM2 blade, click Disaster recovery, click Replication settings, and then select RSV2 as the Recovery Services vault.
B. From the RSV2 blade, click Backup. From the Backup blade, select the backup for the virtual machine, and then click Backup.
C. From the RSV1 blade, click Backup Jobs and export the VM2 job.
D. From the RSV1 blade, click Backup items and stop the VM2 backup.

Answer 20

Correct Answer: A
Reference:
https://docs.microsoft.com/en-us/azure/backup/backup-azure-vms-first-look-arm

Question 21

You have a Recovery Service vault that you use to test backups. The test backups contain two protected virtual machines.
You need to delete the Recovery Services vault.
What should you do first?

A. From the Recovery Service vault, delete the backup data.
B. Modify the disaster recovery properties of each virtual machine.
C. From the Recovery Service vault, stop the backup of each backup item.
D. Modify the locks of each virtual machine.

Answer 21

Correct Answer: C
You can’t delete a Recovery Services vault if it is registered to a server and holds backup data. If you try to delete a vault, but can’t, the vault is still configured to receive backup data.
Remove vault dependencies and delete vault
In the vault dashboard menu, scroll down to the Protected Items section, and click Backup Items. In this menu, you can stop and delete Azure File Servers, SQL
Servers in Azure VM, and Azure virtual machines.

Question 22

You have an Azure subscription that contains a storage account named account1.
You plan to upload the disk files of a virtual machine to account1 from your on-premises network. The on-premises network uses a public IP address space of
131.107.1.0/24.
You plan to use the disk files to provision an Azure virtual machine named VM1. VM1 will be attached to a virtual network named VNet1. VNet1 uses an IP address space of 192.168.0.0/24.
You need to configure account1 to meet the following requirements:
✑ Ensure that you can upload the disk files to account1.
✑ Ensure that you can attach the disks to VM1.
✑ Prevent all other access to account1.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. From the Firewalls and virtual networks blade of account1, add VNet1.
B. From the Firewalls and virtual networks blade of account1, select Allow trusted Microsoft services to access this storage account.
C. From the Firewalls and virtual networks blade of account1, add the 131.107.1.0/24 IP address range.
D. From the Firewalls and virtual networks balde of account1, select Selected networks.
E. From the Service endpoints blade of VNet1, add a service endpoint.

Answer 22

Correct Answer: DE
D: By default, storage accounts accept connections from clients on any network. To limit access to selected networks, you must first change the default action.

Azure portal -

1. Navigate to the storage account you want to secure.
2. Click on the settings menu called Firewalls and virtual networks.
3. To deny access by default, choose to allow access from ‘Selected networks’. To allow traffic from all networks, choose to allow access from ‘All networks’.
4. Click Save to apply your changes.

E: Grant access from a Virtual Network
Storage accounts can be configured to allow access only from specific Azure Virtual Networks.
By enabling a Service Endpoint for Azure Storage within the Virtual Network, traffic is ensured an optimal route to the Azure Storage service. The identities of the virtual network and the subnet are also transmitted with each request.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-network-security

Question 23

You have an Azure subscription named Subscription1.
You have 5 TB of data that you need to transfer to Subscription1.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?

A. an Azure Cosmos DB database
B. Azure File Storage
C. the Azure File Sync Storage Sync Service
D. Azure Data Factory

Answer 23

Correct Answer: B
Azure Import/Export service is used to securely import large amounts of data to Azure Blob storage and Azure Files by shipping disk drives to an Azure datacenter.
The maximum size of an Azure Files Resource of a file share is 5 TB.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service

Question 24

You have an Azure subscription named Subscription1.
You have 5 TB of data that you need to transfer to Subscription1.
You plan to use an Azure Import/Export job.
What can you use as the destination of the imported data?

A. Azure Data Lake Store
B. a virtual machine
C. the Azure File Sync Storage Sync Service
D. Azure Blob storage

Answer 24

Correct Answer: D
Azure Import/Export service is used to securely import large amounts of data to Azure Blob storage and Azure Files by shipping disk drives to an Azure datacenter.
The maximum size of an Azure Files Resource of a file share is 5 TB.
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-import-export-service

Question 25

You have an Azure subscription that contains a virtual machine named VM1. VM1 hosts a line-of-business application that is available 24 hours a day. VM1 has one network interface and one managed disk. VM1 uses the D4s v3 size.
You plan to make the following changes to VM1:
✑ Change the size to D8s v3.
✑ Add a 500-GB managed disk.
✑ Add the Puppet Agent extension.
✑ Attach an additional network interface.
Which change will cause downtime for VM1?

A. Add the Puppet Agent extension.
B. Change the size to D8s v3.
C. Add a 500-GB managed disk.
D. Attach an additional network interface.

Answer 25

Correct Answer: B
While resizing the VM it must be in a stopped state.
References:
https://azure.microsoft.com/en-us/blog/resize-virtual-machines/

Question 26

You have an Azure virtual machine named VM1 that you use for testing. VM1 is protected by Azure Backup.
You delete VM1.
You need to remove the backup data stored for VM1.
What should you do first?

A. Delete the Recovery Services vault.
B. Delete the storage account.
C. Stop the backup
D. Modify the backup policy.

Answer 26

Correct Answer: D
Azure Backup provides backup for virtual machines “” created through both the classic deployment model and the Azure Resource Manager deployment model “” by using custom-defined backup policies in a Recovery Services vault.
With the release of backup policy management, customers can manage backup policies and model them to meet their changing requirements from a single window. Customers can edit a policy, associate more virtual machines to a policy, and delete unnecessary policies to meet their compliance requirements.
Incorrect Answers:
B: You can’t delete a Recovery Services vault if it is registered to a server and holds backup data. If you try to delete a vault, but can’t, the vault is still configured to receive backup data.
References:
https://azure.microsoft.com/en-in/updates/azure-vm-backup-policy-management/

Question 27

You have an Azure subscription named Subscription1.
You deploy a Linux virtual machine named VM1 to Subscription1.
You need to monitor the metrics and the logs of VM1.
What should you use?

A. the AzurePerformanceDiagnostics extension
B. Azure HDInsight
C. Linux Diagnostic Extension (LAD) 3.0
D. Azure Analysis Services

Answer 27

Correct Answer: A
You can use extensions to configure diagnostics on your VMs to collect additional metric data.
The basic host metrics are available, but to see more granular and VM-specific metrics, you need to install the Azure diagnostics extension on the VM. The Azure diagnostics extension allows additional monitoring and diagnostics data to be retrieved from the VM.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/linux/tutorial-monitoring

Question 28

You have an Azure subscription that contains 100 virtual machines.
You regularly create and delete virtual machines.
You need to identify unattached disks that can be deleted.
What should you do?

A. From Microsoft Azure Storage Explorer, view the Account Management properties.
B. From the Azure portal, configure the Advisor recommendations.
C. From Azure Cost Management, view Advisor Recommendations.
D. From Azure Cost Management, view Cost Analysis.

Answer 28

Correct Answer: A
You can find unused disks in the Azure Storage Explorer console.Once you drill down to the Blob containers under a storage account, you can see the lease state of the residing VHD (the lease state determines if the VHD is being used by any resource) and the VM to which it is leased out. If you find that the lease state and the VM fields are blank, it means that the VHD in question is unused. The screenshot below shows two active VHDs being used by VMs as data and OS disks.
The name of the VM and lease state are shown in the “VM Name” and “Lease State” columns, respectively.
Reference:
https://cloud.netapp.com/blog/reduce-azure-storage-costs

Question 29

You have an Azure virtual machine named VM1.
Azure collects events from VM1.
You are creating an alert rule in Azure Monitor to notify an administrator when an error is logged in the System event log of VM1.
You need to specify which resource type to monitor.
What should you specify?

A. metric alert
B. Azure Log Analytics workspace
C. virtual machine
D. virtual machine extension

Answer 29

Correct Answer: D
Azure Monitor can collect data directly from your Azure virtual machines into a Log Analytics workspace for detailed analysis and correlation. Installing the Log
Analytics VM extension for Windows and Linux allows Azure Monitor to collect data from your Azure VMs.
Incorrect Answers:
B: Azure Log Analytics workspace is used for on-premises computers monitored by System Center Operations Manager.
Reference:
https://docs.microsoft.com/en-us/azure/azure-monitor/learn/quick-collect-azurevm

Question 30

You plan to back up an Azure virtual machine named VM1.
You discover that the Backup Pre-Check status displays a status of Warning.
What is a possible cause of the Warning status?

A. VM1 is stopped.
B. VM1 does not have the latest version of WaAppAgent.exe installed.
C. VM1 has an unmanaged disk.
D. A Recovery Services vault is unavailable.

Answer 30

Correct Answer: B
The Warning state indicates one or more issues in VM’s configuration that might lead to backup failures and provides recommended steps to ensure successful backups. Not having the latest VM Agent installed, for example, can cause backups to fail intermittently and falls in this class of issues.
References:
https://azure.microsoft.com/en-us/blog/azure-vm-backup-pre-checks/

Question 31

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Overview blade, you move the virtual machine to a different subscription.
Does this meet the goal?

A. Yes
B. No

Answer 31

Correct Answer: B
You would need to redeploy the VM.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node

Question 32

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Redeploy blade, you click Redeploy.
Does this meet the goal?

A. Yes
B. No

Answer 32

Correct Answer: A
When you redeploy a VM, it moves the VM to a new node within the Azure infrastructure and then powers it back on, retaining all your configuration options and associated resources.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node

Question 33

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure virtual machine named VM1. VM1 was deployed by using a custom Azure Resource Manager template named ARM1.json.
You receive a notification that VM1 will be affected by maintenance.
You need to move VM1 to a different host immediately.
Solution: From the Update management blade, you click Enable.
Does this meet the goal?

A. Yes
B. No

Answer 33

Correct Answer: B
You would need to redeploy the VM.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/windows/redeploy-to-new-node

Question 34

You download an Azure Resource Manager template based on an existing virtual machine. The template will be used to deploy 100 virtual machines.
You need to modify the template to reference an administrative password. You must prevent the password from being stored in plain text.
What should you create to store the password?

A. an Azure Key Vault and an access policy
B. a Recovery Services vault and a backup policy
C. Azure Active Directory (AD) Identity Protection and an Azure policy
D. an Azure Storage account and an access policy

Answer 34

Correct Answer: A
You can use a template that allows you to deploy a simple Windows VM by retrieving the password that is stored in a Key Vault. Therefore, the password is never put in plain text in the template parameter file.
References:
https://azure.microsoft.com/en-us/resources/templates/101-vm-secure-password/

Question 35

You plan to automate the deployment of a virtual machine scale set that uses the Windows Server 2016 Datacenter image.
You need to ensure that when the scale set virtual machines are provisioned, they have web server components installed.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Modify the extensionProfile section of the Azure Resource Manager template.
B. Create an automation account.
C. Upload a configuration script.
D. Create a new virtual machine scale set in the Azure portal.
E. Create an Azure policy.

Answer 35

Correct Answer: AD
Virtual Machine Scale Sets can be used with the Azure Desired State Configuration (DSC) extension handler. Virtual machine scale sets provide a way to deploy and manage large numbers of virtual machines, and can elastically scale in and out in response to load. DSC is used to configure the VMs as they come online so they are running the production software.
References:
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/virtual-machine-scale-sets-dsc

Question 36

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company registers a domain name of contoso.com.
You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
You need to resolve the name resolution issue.
Solution: You create a PTR record for www in the contoso.com zone.
Does this meet the goal?

A. Yes
B. No

Answer 36

Correct Answer: B
Modify the Name Server (NS) record.
References:
https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

Question 37

You have five Azure virtual machines that run Windows Server 2016. The virtual machines are configured as web servers.
You have an Azure load balancer named LB1 that provides load balancing services for the virtual machines.
You need to ensure that visitors are serviced by the same web server for each request.
What should you configure?

A. Idle Time-out (minutes) to 20
B. Floating IP (direct server return) to Disabled
C. Floating IP (direct server return) to Enabled
D. Session persistence to Client IP and protocol
E. a health probe

Answer 37

Correct Answer: D
With Sticky Sessions when a client starts a session on one of your web servers, session stays on that specific server. To configure An Azure Load-Balancer For
Sticky Sessions set Session persistence to Client IP.

Question 38

You have a public load balancer that balances ports 80 and 443 across three virtual machines.
You need to direct all the Remote Desktop Protocol (RDP) connections to VM3 only.
What should you configure?

A. an inbound NAT rule
B. a load balancing rule
C. a new public load balancer for VM3
D. a frontend IP configuration

Answer 38

Correct Answer: A
References:
https://docs.microsoft.com/en-us/azure/load-balancer/tutorial-load-balancer-port-forwarding-portal https://pixelrobots.co.uk/2017/08/azure-load-balancer-for-rds/

Question 39

You have an Azure subscription that contains three virtual networks named VNet1, VNet2, and VNet3. VNet2 contains a virtual appliance named VM2 that operates as a router.
You are configuring the virtual networks in a hub and spoke topology that uses VNet2 as the hub network.
You plan to configure peering between VNet1 and Vnet2 and between VNet2 and VNet3.
You need to provide connectivity between VNet1 and VNet3 through VNet2.
Which two configurations should you perform? Each correct answer presents part of the solution.

A. On the peering connections, use remote gateways.
B. On the peering connections, allow forwarded traffic.
C. On the peering connections, allow gateway transit.
D. Create route tables and assign the table to subnets.
E. Create a route filter.

Answer 39

Correct Answer: AC
Allow gateway transit: Check this box if you have a virtual network gateway attached to this virtual network and want to allow traffic from the peered virtual network to flow through the gateway.
The peered virtual network must have the Use remote gateways checkbox checked when setting up the peering from the other virtual network to this virtual network.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-manage-peering#requirements-and-constraints

Question 40

You have an Azure subscription named Subscription1 that contains an Azure virtual network named VNet1. VNet1 connects to your on-premises network by using
Azure ExpressRoute.
You need to connect VNet1 to the on-premises network by using a site-to-site VPN. The solution must minimize cost.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point
.
A. Create a gateway subnet.
B. Create a VPN gateway that uses the Basic SKU.
C. Create a connection.
D. Create a local site VPN gateway.
E. Create a VPN gateway that uses the VpnGw1 SKU.

Answer 40

Correct Answer: ABC
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-site-to-site-resource-manager-portal

Question 41

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company registers a domain name of contoso.com.
You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
You need to resolve the name resolution issue.
Solution: You modify the name servers at the domain registrar.
Does this meet the goal?

A. Yes
B. No

Answer 41

Correct Answer: B
Modify the Name Server (NS) record.
References:
https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

Question 42

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company registers a domain name of contoso.com.
You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
You need to resolve the name resolution issue.
Solution: You modify the SOA record in the contoso.com zone.
Does this meet the goal?

A. Yes
B. No

Answer 42

Correct Answer: B
Modify the NS record, not the SOA record.
Note: The SOA record stores information about the name of the server that supplied the data for the zone; the administrator of the zone; the current version of the data file; the number of seconds a secondary name server should wait before checking for updates; the number of seconds a secondary name server should wait before retrying a failed zone transfer; the maximum number of seconds that a secondary name server can use data before it must either be refreshed or expire; and a default number of seconds for the time-to-live file on resource records.
References:
https://searchnetworking.techtarget.com/definition/start-of-authority-record

Question 43

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your company registers a domain name of contoso.com.
You create an Azure DNS zone named contoso.com, and then you add an A record to the zone for a host named www that has an IP address of 131.107.1.10.
You discover that Internet hosts are unable to resolve www.contoso.com to the 131.107.1.10 IP address.
You need to resolve the name resolution issue.
Solution: You add an NS record to the contoso.com Azure DNS zone.
Does this meet the goal?

A. Yes
B. No

Answer 43

Correct Answer: A
Before you can delegate your DNS zone to Azure DNS, you need to know the name servers for your zone. The NS record set contains the names of the Azure
DNS name servers assigned to the zone.
References:
https://docs.microsoft.com/en-us/azure/dns/dns-delegate-domain-azure-dns

Question 44

You are troubleshooting a performance issue for an Azure Application Gateway.
You need to compare the total requests to the failed requests during the past six hours.
What should you use?

A. NSG flow logs in Azure Network Watcher
B. Metrics in Application Gateway
C. Connection monitor in Azure Network Watcher
D. Diagnostics logs in Application Gateway

Answer 44

Correct Answer: B
References:
https://docs.microsoft.com/en-us/azure/application-gateway/application-gateway-diagnostics#metrics

Question 45

You have two subscriptions named Subscription1 and Subscription2. Each subscription is associated to a different Azure AD tenant.
Subscription1 contains a virtual network named VNet1. VNet1 contains an Azure virtual machine named VM1 and has an IP address space of 10.0.0.0/16.
Subscription2 contains a virtual network named VNet2. VNet2 contains an Azure virtual machine named VM2 and has an IP address space of 10.10.0.0/24.
You need to connect VNet1 to VNet2.
What should you do first?

A. Move VM1 to Subscription2.
B. Modify the IP address space of VNet2.
C. Provision virtual network gateways.
D. Move VNet1 to Subscription2.

Answer 45

Correct Answer: C
The virtual networks can be in the same or different regions, and from the same or different subscriptions. When connecting VNets from different subscriptions, the subscriptions do not need to be associated with the same Active Directory tenant.
Configuring a VNet-to-VNet connection is a good way to easily connect VNets. Connecting a virtual network to another virtual network using the VNet-to-VNet connection type (VNet2VNet) is similar to creating a Site-to-Site IPsec connection to an on-premises location. Both connectivity types use a VPN gateway to provide a secure tunnel using IPsec/IKE, and both function the same way when communicating.
The local network gateway for each VNet treats the other VNet as a local site. This lets you specify additional address space for the local network gateway in order to route traffic.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-howto-vnet-vnet-resource-manager-portal

Question 46

You have five Azure virtual machines that run Windows Server 2016. The virtual machines are configured as web servers.
You have an Azure load balancer named LB1 that provides load balancing services for the virtual machines.
You need to ensure that visitors are serviced by the same web server for each request.
What should you configure?

A. Protocol to UDP
B. Session persistence to None
C. Session persistence to Client IP
D. Idle Time-out (minutes) to 20

Answer 46

Correct Answer: C
You can set the sticky session in load balancer rules with setting the session persistence as the client IP.
References:
https://cloudopszone.com/configure-azure-load-balancer-for-sticky-sessions/

Question 47

You have an Azure subscription that contains a policy-based virtual network gateway named GW1 and a virtual network named VNet1.
You need to ensure that you can configure a point-to-site connection from VNet1 to an on-premises computer.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Reset GW1.
B. Create a route-based virtual network gateway.
C. Delete GW1.
D. Add a public IP address space to VNet1.
E. Add a connection to GW1.
F. Add a service endpoint to VNet1.

Answer 47

Correct Answer: BC
B: A VPN gateway is used when creating a VPN connection to your on-premises network.
Route-based VPN devices use any-to-any (wildcard) traffic selectors, and let routing/forwarding tables direct traffic to different IPsec tunnels. It is typically built on router platforms where each IPsec tunnel is modeled as a network interface or VTI (virtual tunnel interface).
C: Policy-based VPN devices use the combinations of prefixes from both networks to define how traffic is encrypted/decrypted through IPsec tunnels. It is typically built on firewall devices that perform packet filtering. IPsec tunnel encryption and decryption are added to the packet filtering and processing engine.
Incorrect Answers:
D: Point-to-Site connections do not require a VPN device or a public-facing IP address.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/create-routebased-vpn-gateway-portal https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-connect-multiple-policybased-rm-ps

Question 48

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the virtual networks.
Solution: You create a resource lock, and then you assign the lock to the subscription.
Does this meet the goal?

A. Yes
B. No

Answer 48

Correct Answer: B
How can I freeze or lock my production/critical Azure resources from accidental deletion? There is a way to do this with both ASM and ARM resources using
Azure resource lock.
Reference:
https://blogs.msdn.microsoft.com/azureedu/2016/04/27/using-azure-resource-manager-policy-and-azure-lock-to-control-your-azure-resources/

Question 49

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the virtual networks.
Solution: You configure a custom policy definition, and then you assign the policy to the subscription.
Does this meet the goal?

A. Yes
B. No

Answer 49

Correct Answer: A
Resource policy definition used by Azure Policy enables you to establish conventions for resources in your organization by describing when the policy is enforced and what effect to take. By defining conventions, you can control costs and more easily manage your resources.
Reference:
https://docs.microsoft.com/en-us/azure/azure-policy/policy-definition

Question 50

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains 10 virtual networks. The virtual networks are hosted in separate resource groups.
Another administrator plans to create several network security groups (NSGs) in the subscription.
You need to ensure that when an NSG is created, it automatically blocks TCP port 8080 between the virtual networks.
Solution: From the Resource providers blade, you unregister the Microsoft.ClassicNetwork provider.
Does this meet the goal?

A. Yes
B. No

Answer 50

Correct Answer: B
You should use a policy definition.
Reference:
https://docs.microsoft.com/en-us/azure/azure-policy/policy-definition

Question 51

You have an Azure subscription that contains a virtual network named VNet1. VNet1 contains four subnets named Gateway, Perimeter, NVA, and Production.
The NVA subnet contains two network virtual appliances (NVAs) that will perform network traffic inspection between the Perimeter subnet and the Production subnet.
You need to implement an Azure load balancer for the NVAs. The solution must meet the following requirements:
✑ The NVAs must run in an active-active configuration that uses automatic failover.
✑ The NVAs must load balance traffic to two services on the Production subnet. The services have different IP addresses.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Add two load balancing rules that have HA Ports enabled and Floating IP disabled.
B. Add a frontend IP configuration, two backend pools, and a health probe.
C. Add two load balancing rules that have HA Ports and Floating IP enabled.
D. Deploy a standard load balancer.
E. Deploy a basic load balancer.
F. Add a frontend IP configuration a backend pool, and a health probe.

Answer 51

Correct Answer: BCD
A standard load balancer is required for the HA ports.
Two backend pools are needed as there are two services with different IP addresses.
Floating IP rule is used where backend ports are reused.
Incorrect Answers:
F: HA Ports are not available for the basic load balancer.
References:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-standard-overview https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-multivip-overview

Question 52

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that has a point-to-site VPN connection to an Azure virtual network named VNet1. The point-to-site connection uses a self-signed certificate.
From Azure, you download and install the VPN client configuration package on a computer named Computer2.
You need to ensure that you can establish a point-to-site VPN connection to VNet1 from Computer2.
Solution: You export the client certificate from Computer1 and install the certificate on Computer2.
Does this meet the goal?

A. Yes
B. No

Answer 52

Correct Answer: A
Each client computer that connects to a VNet using Point-to-Site must have a client certificate installed. You generate a client certificate from the self-signed root certificate, and then export and install the client certificate. If the client certificate is not installed, authentication fails.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-certificates-point-to-site

Question 53

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a computer named Computer1 that has a point-to-site VPN connection to an Azure virtual network named VNet1. The point-to-site connection uses a self-signed certificate.
From Azure, you download and install the VPN client configuration package on a computer named Computer2.
You need to ensure that you can establish a point-to-site VPN connection to VNet1 from Computer2.
Solution: On Computer2, you set the Startup type for the IPSec Policy Agent service to Automatic.
Does this meet the goal?

A. Yes
B. No

Answer 53

Correct Answer: B
Instead export the client certificate from Computer1 and install the certificate on Computer2.
Note: Each client computer that connects to a VNet using Point-to-Site must have a client certificate installed. You generate a client certificate from the self-signed root certificate, and then export and install the client certificate. If the client certificate is not installed, authentication fails.
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-certificates-point-to-site

Question 54

You have an Azure subscription named Subscription1 that contains an Azure virtual network named VM1. VM1 is in a resource group named RG1.
VM1 runs services that will be used to deploy resources to RG1.
You need to ensure that a service running on VM1 can manage the resources in RG1 by using the identity of VM1.
What should you do first?

A. From the Azure portal, modify the Access control (IAM) settings of RG1.
B. From the Azure portal, modify the Policies settings of RG1.
C. From the Azure portal, modify the Access control (IAM) settings of VM1.
D. From the Azure portal, modify the value of the Managed Service Identity option for VM1.

Answer 54

Correct Answer: D
The managed identities for Azure resources feature in Azure Active Directory (Azure AD) solves this problem. The feature provides Azure services with an automatically managed identity in Azure AD. You can use the identity to authenticate to any service that supports Azure AD authentication, including Key Vault, without any credentials in your code.
References:
https://docs.microsoft.com/en-us/azure/active-directory/managed-identities-azure-resources/overview

Question 55

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Network Watcher, you create a connection monitor.
Does this meet the goal?

A. Yes
B. No

Answer 55

Correct Answer: A
References:
https://azure.microsoft.com/en-us/updates/general-availability-azure-network-watcher-connection-monitor-in-all-public-regions/

Question 56

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Azure Network Watcher, you create a packet capture.
Does this meet the goal?

A. Yes
B. No

Answer 56

Correct Answer: B
Use the Connection Monitor feature of Azure Network Watcher.
References:
https://azure.microsoft.com/en-us/updates/general-availability-azure-network-watcher-connection-monitor-in-all-public-regions/

Question 57

You have an Azure subscription named Subscription1 that contains two Azure virtual networks named VNet1 and VNet2. VNet1 contains a VPN gateway named
VPNGW1 that uses static routing. There is a site-to-site VPN connection between your on-premises network and VNet1.
On a computer named Client1 that runs Windows 10, you configure a point-to-site VPN connection to VNet1.
You configure virtual network peering between VNet1 and VNet2. You verify that you can connect to VNet2 from the on-premises network. Client1 is unable to connect to VNet2.
You need to ensure that you can connect Client1 to VNet2.
What should you do?

A. Select Allow gateway transit on VNet2.
B. Enable BGP on VPNGW1.
C. Select Allow gateway transit on VNet1.
D. Download and re-install the VPN client configuration package on Client1.

Answer 57

Correct Answer: D
References:
https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-about-point-to-site-routing

Question 58

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You manage a virtual network named VNet1 that is hosted in the West US Azure region.
VNet1 hosts two virtual machines named VM1 and VM2 that run Windows Server.
You need to inspect all the network traffic from VM1 to VM2 for a period of three hours.
Solution: From Performance Monitor, you create a Data Collector Set (DCS).
Does this meet the goal?

A. Yes
B. No

Answer 58

Correct Answer: B
Use the Connection Monitor feature of Azure Network Watcher.
References:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview

Question 59

You have two Azure virtual networks named VNet1 and VNet2. VNet1 contains an Azure virtual machine named VM1. VNet2 contains an Azure virtual machine named VM2.
VM1 hosts a frontend application that connects to VM2 to retrieve data.
Users report that the frontend application is slower than usual.
You need to view the average round-trip time (RTT) of the packets from VM1 to VM2.
Which Azure Network Watcher feature should you use?

A. IP flow verify
B. Connection monitor
C. NSG flow logs
D. Connection troubleshoot

Answer 59

Correct Answer: B
The connection monitor capability monitors communication at a regular interval and informs you of reachability, latency, and network topology changes between the VM and the endpoint
Incorrect Answers:
A: The IP flow verify capability enables you to specify a source and destination IPv4 address, port, protocol (TCP or UDP), and traffic direction (inbound or outbound). IP flow verify then tests the communication and informs you if the connection succeeds or fails. If the connection fails, IP flow verify tells you which security rule allowed or denied the communication, so that you can resolve the problem.
C: The NSG flow log capability allows you to log the source and destination IP address, port, protocol, and whether traffic was allowed or denied by an NSG.
D: The connection troubleshoot capability enables you to test a connection between a VM and another VM, an FQDN, a URI, or an IPv4 address. The test returns similar information returned when using the connection monitor capability, but tests the connection at a point in time, rather than monitoring it over time, as connection monitor does.
Reference:
https://docs.microsoft.com/en-us/azure/network-watcher/network-watcher-monitoring-overview

Question 60

You have two Azure Active Directory (Azure AD) tenants named contoso.com and fabrikam.com.
You have a Microsoft account that you use to sign in to both tenants.
You need to configure the default sign-in tenant for the Azure portal.
What should you do?

A. From Azure Cloud Shell, run Set-AzureRmSubscription.
B. From Azure Cloud Shell, run Set-AzureRmContext.
C. From the Azure portal, configure the portal settings.
D. From the Azure portal, change the directory.

Answer 60

Correct Answer: B
The Set-AzureRmContext cmdlet sets authentication information for cmdlets that you run in the current session. The context includes tenant, subscription, and environment information.
References:
https://docs.microsoft.com/en-us/powershell/module/azurerm.profile/set-azurermcontext

Question 61

You have an Azure Active Directory (Azure AD) tenant.
All administrators must enter a verification code to access the Azure portal.
You need to ensure that the administrators can access the Azure portal only from your on-premises network.
What should you configure?

A. an Azure AD Identity Protection user risk policy.
B. the multi-factor authentication service settings.
C. the default for all the roles in Azure AD Privileged Identity Management
D. an Azure AD Identity Protection sign-in risk policy

Answer 61

Correct Answer: B

Question 62

You have an Active Directory forest named contoso.com.
You install and configure Azure AD Connect to use password hash synchronization as the single sign-on (SSO) method. Staging mode is enabled.
You review the synchronization results and discover that the Synchronization Service Manager does not display any sync jobs.
You need to ensure that the synchronization completes successfully.
What should you do?

A. Run Azure AD Connect and set the SSO method to Pass-through Authentication.
B. From Synchronization Service Manager, run a full import.
C. From Azure PowerShell, run Start-AdSyncSyncCycle ““PolicyType Initial.
D. Run Azure AD Connect and disable staging mode.

Answer 62

Correct Answer: D
Staging mode must be disabled. If the Azure AD Connect server is in staging mode, password hash synchronization is temporarily disabled.
References:
https://docs.microsoft.com/en-us/azure/active-directory/connect/active-directory-aadconnectsync-troubleshoot-password-hash-synchronization#no-passwords- are-synchronized-troubleshoot-by-using-the-troubleshooting-task

Question 63

You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?

A. SRV
B. PTR
C. RRSIG
D. TXT

Answer 63

Correct Answer: D
References:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-domain

Question 64

You sign up for Azure Active Directory (Azure AD) Premium.
You need to add a user named admin1@contoso.com as an administrator on all the computers that will be joined to the Azure AD domain.
What should you configure in Azure AD?

A. Providers from the MFA Server blade
B. Device settings from the Devices blade
C. General settings from the Groups blade
D. User settings from the Users blade

Answer 64

Correct Answer: B
When you connect a Windows device with Azure AD using an Azure AD join, Azure AD adds the following security principles to the local administrators group on the device:
✑ The Azure AD global administrator role
✑ The Azure AD device administrator role
✑ The user performing the Azure AD join
In the Azure portal, you can manage the device administrator role on the Devices page. To open the Devices page:
1. Sign in to your Azure portal as a global administrator or device administrator.
2. On the left navbar, click Azure Active Directory.
3. In the Manage section, click Devices.
4. On the Devices page, click Device settings.
5. To modify the device administrator role, configure Additional local administrators on Azure AD joined devices.
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/devices/assign-local-admin

Question 65

You have an Azure Active Directory (Azure AD) tenant.
You have an existing Azure AD conditional access policy named Policy1. Policy1 enforces the use of Azure AD-joined devices when members of the Global
Administrators group authenticate to Azure AD from untrusted locations.
You need to ensure that members of the Global Administrators group will also be forced to use multi-factor authentication when authenticating from untrusted locations.
What should you do?

A. From the Azure portal, modify session control of Policy1.
B. From the multi-factor authentication page, modify the user settings.
C. From the Azure portal, modify grant control of Policy1.
D. From the multi-factor authentication page, modify the service settings.

Answer 65

Correct Answer: C
There are two types of controls:
✑ Grant controls “” To gate access
✑ Session controls “” To restrict access to a session
Grant controls oversee whether a user can complete authentication and reach the resource that they’re attempting to sign-in to. If you have multiple controls selected, you can configure whether all of them are required when your policy is processed.

Question 66

You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
You hire a temporary vendor. The vendor uses a Microsoft account that has a sign-in of user1@outlook.com.
You need to ensure that the vendor can authenticate to the tenant by using user1@outlook.com.
What should you do?

A. From the Azure portal, add a custom domain name, create a new Azure AD user, and then specify user1@outlook.com as the username.
B. From Azure Cloud Shell, run the New-AzureADUser cmdlet and specify the ““UserPrincipalName user1@outlook.com parameter.
C. From the Azure portal, add a new guest user, and then specify user1@outlook.com as the email address.
D. From Windows PowerShell, run the New-AzureADUser cmdlet and specify the ““UserPrincipalName user1@outlook.com parameter.

Answer 66

Correct Answer: D
UserPrincipalName - contains the UserPrincipalName (UPN) of this user. The UPN is what the user will use when they sign in into Azure AD. The common structure is @, so for Abby Brown in Contoso.com, the UPN would be AbbyB@contoso.com
Example:
To create the user, call the New-AzureADUser cmdlet with the parameter values: powershell New-AzureADUser -AccountEnabled $True -DisplayName “Abby Brown” -PasswordProfile $PasswordProfile -MailNickName “AbbyB” -
UserPrincipalName “AbbyB@contoso.com”
References:
https://docs.microsoft.com/bs-cyrl-ba/powershell/azure/active-directory/new-user-sample?view=azureadps-2.0

Question 67

You have an Azure Active Directory (Azure AD) tenant named contosocloud.onmicrosoft.com.
Your company has a public DNS zone for contoso.com.
You add contoso.com as a custom domain name to Azure AD.
You need to ensure that Azure can verify the domain name.
Which type of DNS record should you create?

A. MX
B. SRV
C. DNSKEY
D. NSEC

Answer 67

Correct Answer: A
References:
https://docs.microsoft.com/en-us/azure/dns/dns-web-sites-custom-domain

Question 68

You set the multi-factor authentication status for a user named admin1@contoso.com to Enabled.
Admin1 accesses the Azure portal by using a web browser.
Which additional security verifications can Admin1 use when accessing the Azure portal?

A. a phone call, a text message that contains a verification code, and a notification or a verification code sent from the Microsoft Authenticator app
B. an app password, a text message that contains a verification code, and a notification sent from the Microsoft Authenticator app
C. an app password, a text message that contains a verification code, and a verification code sent from the Microsoft Authenticator app
D. a phone call, an email message that contains a verification code, and a text message that contains an app password

Answer 68

Correct Answer: A

Question 69

Your company has a main office in London that contains 100 client computers.
Three years ago, you migrated to Azure Active Directory (Azure AD).
The company’s security policy states that all personal devices and corporate-owned devices must be registered or joined to Azure AD.

A remote user named User1 is unable to join a personal device to Azure AD from a home network.
You verify that other users can join their devices to Azure AD.
You need to ensure that User1 can join the device to Azure AD.
What should you do?
A. From the Device settings blade, modify the Users may join devices to Azure AD setting.
B. From the Device settings blade, modify the Maximum number of devices per user setting.
C. Create a point-to-site VPN from the home network of User1 to Azure.
D. Assign the User administrator role to User1.

Answer 69

Correct Answer: B
The Maximum number of devices setting enables you to select the maximum number of devices that a user can have in Azure AD. If a user reaches this quota, they will not be able to add additional devices until one or more of the existing devices are removed.
Incorrect Answers:
A: The Users may join devices to Azure AD setting enables you to select the users who can join devices to Azure AD. Options are All, Selected and None. The default is All.
C: Azure AD Join enables users to join their devices to Active Directory from anywhere as long as they have connectivity with the Internet.
References:
https://docs.microsoft.com/en-us/azure/active-directory/devices/device-management-azure-portal http://techgenix.com/pros-and-cons-azure-ad-join/

Question 70

You have an Azure DNS zone named adatum.com.
You need to delegate a subdomain named research.adatum.com to a different DNS server in Azure.
What should you do?

A. Create an A record named *.research in the adatum.com zone.
B. Create a PTR record named research in the adatum.com zone.
C. Modify the SOA record of adatum.com.
D. Create an NS record named research in the adatum.com zone.

Answer 70

Correct Answer: D
You need to create a name server (NS) record for the zone.
References:
https://docs.microsoft.com/en-us/azure/dns/delegate-subdomain

Question 71

You have an Azure Active Directory (Azure AD) tenant named contoso.onmicrosoft.com.
The User administrator role is assigned to a user named Admin1.
An external partner has a Microsoft account that uses the user1@outlook.com sign in.
Admin1 attempts to invite the external partner to sign in to the Azure AD tenant and receives the following error message: “Unable to invite user user1@outlook.com “” Generic authorization exception.”
You need to ensure that Admin1 can invite the external partner to sign in to the Azure AD tenant.
What should you do?

A. From the Roles and administrators blade, assign the Security administrator role to Admin1.
B. From the Organizational relationships blade, add an identity provider.
C. From the Custom domain names blade, add a custom domain.
D. From the Users blade, modify the External collaboration settings.

Answer 71

Correct Answer: D
References:
https://techcommunity.microsoft.com/t5/Azure-Active-Directory/Generic-authorization-exception-inviting-Azure-AD-gests/td-p/274742

Question 72

You configure Azure AD Connect for Azure Active Directory Seamless Single Sign-On (Azure AD Seamless SSO) for an on-premises network.
Users report that when they attempt to access myapps.microsoft.com, they are prompted multiple times to sign in and are forced to use an account name that ends with onmicrosoft.com.
You discover that there is a UPN mismatch between Azure AD and the on-premises Active Directory.
You need to ensure that the users can use single-sign-on (SSO) to access Azure resources.
What should you do first?

A. From the server that runs Azure AD Connect, modify the filtering options.
B. From the on-premises network, deploy Active Directory Federation Services (AD FS).
C. From Azure AD, add and verify a custom domain name.
D. From the on-premises network, request a new certificate that contains the Active Directory domain name.

Answer 72

Correct Answer: C
Every new Azure AD tenant comes with an initial domain name, domainname.onmicrosoft.com. You can’t change or delete the initial domain name, but you can add your organization’s names to the list. Adding custom domain names helps you to create user names that are familiar to your users, such as alain@contoso.com.
References:
https://docs.microsoft.com/en-us/azure/active-directory/fundamentals/add-custom-domain

Question 73

You have an Azure subscription named Subscription1 and two Azure Active Directory (Azure AD) tenants named Tenant1 and Tenant2.
Subscription1 is associated to Tenant1. Multi-factor authentication (MFA) is enabled for all the users in Tenant1.
You need to enable MFA for the users in Tenant2. The solution must maintain MFA for Tenant1.
What should you do first?

A. Change the directory for Subscription1.
B. Configure the MFA Server setting in Tenant1.
C. Create and link a subscription to Tenant2.
D. Transfer the administration of Subscription1 to a global administrator of Tenant2.

Answer 73

Correct Answer: C

Question 74

You have an Azure Active Directory (Azure AD) tenant.
All administrators must enter a verification code to access the Azure portal.
You need to ensure that the administrators can access the Azure portal without entering a verification code when they are connecting from your on-premises network.
What should you configure?

A. an Azure AD Identity Protection user risk policy
B. the multi-factor authentication service settings.
C. the default for all the roles in Azure AD Privileged Identity Management
D. an Azure AD Identity Protection sign-in risk policy

Answer 74

Correct Answer: B
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/howto-mfa-mfasettings
Manage identities

Question 75

You plan to create an Azure Storage account in the Azure region of East US 2. You need to create a storage account that meets the following requirements:
-Replicates synchronously
-Remains available if a single data center in the region fails
How should you configure the storage account for replication?

A. Geo-redundant storage
B. Locally-redundant storage
C. Read-access geo-redundant storage
D. Zone-redundant storage

Answer 75

Correct Answer: D

Zone-Redundant Storage (ZRS) replicates your data synchronously across three storage clusters in a single region. Each cluster is physically separated from the others and is located in its own availability zone (AZ).

Question 76

Which of the following option need to be used to access Azure Key vault secrets and pass them as parameters during resource manager deployment?

A. Access policy
B. Access Keys
C. Shared Access Signature
D. Backup policy

Answer 76

Correct Answer: A

In order to ensure that secrets from Azure Key Vault can be accessed you need to ensure you set the access policies accordingly.

Question 77

A team currently has a virtual machine named “demovm”. You have to transfer the data disk from demovm to another Virtual machine named “demovm2”. You have to ensure that downtime for both Virtual machines is minimized. Which of the following steps would you need to perform for this requirement? Choose 4 answers from the options below

A. Start demovm
B. Start demovm2
C. Stop demovm
D. Stop demovm2
E. Detach disk from demovm
F. Attach disk to demovm2

Answer 77

Correct Answers: A,C,E,F

Question 78

A company has created a storage account in their Azure subscription. The name of the storage account is whizlabstore. They have also created a file share named demo. They need to access the files in the file share via a UNC path. You need to fill in the following blocks to ensure the right UNC path is provided

\.\

Which of the following needs to go into SLOT1?

A. blob
B. blob.core.windows.net
C. portal.azure.com
D. file
E. file.core.windows.net
F. whizlabstore
G. demo

Answer 78

Correct Answer: F

URL format:

https://.file.core.windows.net///

Question 79

A company is planning on deploying an application to a set of VMs in an Azure network. The company needs to have an SLA of 99.99% for the application hosted on the VMs. Which of the following should be implemented to guarantee an SLA of 99.99% on the infrastructure level?

A. Make the VMs part of an availability set
B. Deploy the VMs across availability zones
C. Assign a standard public IP address to the VMs
D. Deploy single VMs across multiple regions

Answer 79

Correct Answer: B

Question 80

What are management groups within Azure?

Answer 80

Management groups are containers that help you manage access, policy, and compliance across multiple subscriptions. Create these containers to build an effective and efficient hierarchy that can be used with Azure Policy and Azure Role Based Access Controls.

Question 81

What are Azure Blueprints?

Answer 81

Azure Blueprints enables cloud architects and central information technology groups to define a repeatable set of Azure resources that implements and adheres to an organization’s standards, patterns, and requirements.

Question 82

How are Blueprints different from ARM Templates

Answer 82

Nearly everything that you want to include for deployment in Azure Blueprints can be accomplished with an ARM template. However, an ARM template is a document that doesn’t exist natively in Azure – each is stored either locally or in source control. The template gets used for deployments of one or more Azure resources, but once those resources deploy there’s no active connection or relationship to the template.

Question 83

What permissions do you need to set a lock on a resource?

Answer 83

To create or delete management locks, you must have access to
Microsoft.Authorization/*
or Microsoft.Authorization/locks/* actions.
Of the built-in roles, only Owner and User Access Administrator are granted those actions.

Question 84

If you have Virtual Networks in two different regions in Azure, Can you do VNet Peering or do you have to use a VPN?

Answer 84

You have to use a VPN gateway.

Question 85

What is the Kubernetes service in Azure called?

Answer 85

Azure Kubernetes Service: AKS

Question 86

What’s the difference between Azure Classic and ARM?

Answer 86

The main difference is how they are managed. Once you deploy, manage or monitor these resources within Azure, if you’re in Classic you’ll be doing everything independently. You’ll be deploying each asset independently and will be managing each asset and resource independently. So, if you have a whole application set for deployment that has 10 resources, that means 10 deployments and 10 independent management components.