Even Steven Flashcards
Turbidity in water results from:
A. Dissolved solids and color
B. Dissolved solids and pH
*C. Colloidal and suspended solids
D. Settleable and floatable solids
In which situations would you not need field blanks?
A. When the sample contains highly volatile pollutants
B. When the past sample results are questionable
C. When the sampling and handling procedures need to be checked
*D. When using new sampling equipmement for the first time
A chain of custody is meant to show:
A. A list of the last 12 month’s violations
*B. A list of persons with access to the sample
C. A slug control plan for the facility
D. The most recent date the industry hauled hazardosu waste
A chain of custody form can be used as:
*A. Evidence in a criminal court case
B. A replacement for a laboraqtory report
C. A replacemtn for a BMR 90-day report
D. A time tracker for the industrial user
What should not be included in an inspection report?
A. Date and time of the inspection
B. Name and title of person contacted
*C. Inspectors opinion of the pretreatment faclities
D. The inspection of monitoring records
A strip of lead acetate paper is used to detect:
A. Oxygen deficiency
*B. Hydrogen deficiency
C. Methane gas
D. Chlorine gas
As an inspector, you arrive to perform an inspection and are denied entry at a facility. Your best response would be to:
A. Demand on entering the facility to continue inspection
B. Apologize and return later when it is more convenient for the facility
C. Threaten to contact with the consequences of denying entry
*D. Leave and call your supervisor for direction
A common treatment to remove silver from photo processing water is:
A. Evaporation
B. Crystallization
C. Reverse osmosis
*D.Electrolytic metal recovery
What is one of the focuses of the 1977 Clean Water Act regarding industrial waste discharges to the municipal sewerage systems?
*A. Prohibit the discharge of toxic pollutants in toxic amounts. Control discharges of toxic substances
B. Develop new technologies to remove pollutants from the wastestream
C. Set specific limits to control all materials that can upset a treatment plant
D. Require industries to remove allpollutants from the wastestream
Which of the following industrial processes is considered to be Categorical by the US EPA?
A. The dry cleaning industry
B. An industry that repairs transmissions
C. An industry that repairs radiators
*D. The pharmaceutical manufacturing industry
An example of an indirect discharge is:
*A. A steam electric power generating plant that discharges to a POTW
B. A metal plater that discharges to the waters of the U.S.
C. A battery manufacturer that discharges process wastewater to the storm drain
D. A metal plater that is discharging to the ocean
In pollution prevention, source reduction does not include:
A. Good operating practices
*B. Recycling
C. Changing the product
D. Chainging the technology or material
The primary aim when responding to a spill incident is to:
A. Prevent pollutants from entering the sanitary sewer
*B. Prevent pollutants from entering teh environment
C. Protect teh industry at fault from enforcement
D. Identify the industry at fault
Control authorities ensure that any change in an industrial users monitoring points does not allow which of the following?
A. Segregation of wastestreams
B. Flow-proportional sampling
*C. Dilution in lieu of adequate treatment
D. Grab sasmple
The abbreviation “BMP’s” stands for:
A. Best maintenance practices
B. Biochemical Measurement Procedures
C. Baseline Monitoring Procedures
*D. Best Management Practices
The federal definition of stormwater is:
*A. Stormwater runoff, snow melt-off and surface runoff and drainage
B. Precipitation exceeding 0.1 inch in any 24-hour period
C. All discharges entering a municipal seperate stormwater system
D. Any discharge resulting from precipitation including incidental pollutants from site drainage and runoff that are dsicharged to waters o fthe U.S.
A restaurant with the maximum daily flow estimated at 15,000 GPD requires a two-hour detention time in its grease interceptor. Which of the following is the minimum size that the interceptor must be?
A. 750 Gallons
*B. 1000 Gallons
C. 1500 Gallons
D. 2000 Gallons
Which of the following actions must be taken to restore a clarifier capacity to hold solids or oil when that capacity has been exceeded?
A. Collect depth measurements
B. Wash out the material in the effluent
C. Divert teh wastestream to another clarifier
*D. Pump out the materials
Calculate the detention time for the 1200 gallon capacity clarifier that treats a flow of 30 GPM.
A. 20 min.
*B. 40 min.
C. 60 min.
D. 90 min.
One of the common hazardous gases that can be generated in a grease interceptor is:
*A. Hydrgen Sulfide
B. Sulfer dioxide
C. Ammonia
D. Chlorine
A lower explosive limit gas detector must be calibrated:
A. fro the specific gas being monitored
*B. for all gases in the field
C. prior to an audit
D. semi-annually in the field