Evaluation Exam 11 Flashcards
A type of electronics communication in which only one party transmits at a time
A. Full duplex
B. Half duplex
C. Bicom
D. Simplex
Half duplex
Power plant having the maximum efficiency is
A. Thermal
B. Hydro
C. Diesel
D. Nuclear
Nuclear
Which of the following shall NOT be excluded in the calculation of reliability standard indices of the distributor asset by the Philippine Distribution Code?
A. Outages that occur in the transmission line.
B. Planned outages where the customers have been notified at least three (3) days prior to the loss of power.
C. Outages that occur on the secondary lines of the distribution system
D. Outages that occur on the primary lines of the distribution system
Outages that occur on the primary lines of the distribution system
Advantages of constant voltage transmission are:
A. same voltage is maintained at all loads
B. all of the above
C. increased power transmission over long distance
D. improved power factors at heavy loads
all of the above
An ACSR conductor has (n-1) layers around its single center strand, the total number of strands will be
A. 3n^2 + 3n - 1
B. 3n^2 + 3n + 1
C. 3n^2 - 3n + 1
D. 3n^2 - 3n - 1
3n^2 - 3n + 1
What contains in each cell site of cellular telephone system?
A. direct-link to branch
B. repeater
C. touch tone processor
D. control computer
repeater
Corona loss is more in
A. transposed conductor
B. stranded conductor
C. ACSR
D. unstranded conductor
unstranded conductor
________ is a process by which atoms are split apart to release energy.
A. Nuclear Spitting
B. Carburizing
C. Fission
D. Fusion
Fission
Which of the following cannot have a single unit of 100 MW?
A. Diesel power plant
B. Steam power plant
C. Nuclear power plant
D. Hydro power plant
Diesel power plant
What is the maximum output power of a cellular transmitter?
A. 6 watts
B. 60 watts
C. 30 watts
D. 3 watts
3 watts
For better illumination, you would use ___________.
A. evenly spaced lights, higher ceilings
B. cluster lights
C. even spacing, numerous lights
D. random spacing of lights
even spacing, numerous lights
The customer is only charged or credited as the case may be, for the difference between the electricity supplied by the Distribution Utility and electricity it supplies to the Distribution Utility when the times it has excess VRE generation both of which are metered using either 2 uni-directional meters, one for import and one for export, or a single bi-directional meter. What do you call this scheme?
A. Dual metering
B. Net metering
C. Import-Export metering
D. Market metering
Net metering
Equalizer bus is necessary for the parallel operation of the:
A. Over compounded generator only
B. series and over compound generators
C. series and under compound generators
D. series generator only
series and over compound generators
A conductor has four identical strands arranged in diamond configuration. Find the GMR of the conductor in terms of the radius r of each strand.
A. 1.3052r
B. 1.6921r
C. 1.3008r
D. 1.7037r
1.6921r
The power factor of receiving end of transmission line is
A. Equal to power factor of sending end
B. Less than the power factor of sending end
C. Not related to power factor of sending end
D. Greater than the power factor of sending end
Less than the power factor of sending end
A thermal power plant has an efficiency of about
A. 30%
B. 40%
C. 20%
D. 60%
30%
In a transmission line of negligible resistance, the surge impedance will be
A. square root of L/C
B. square root of 1/LC
C. square root of C/L
D. square root of LC
square root of L/C
Nuclear reactors generally employ
A. fusion
B. none of these
C. fission
D. both fusion and fission
fission
Megger is an instrument used to measure
A. inductance
B. Q of a coil
C. insulation resistance
D. very low resistance
insulation resistance
What is the maximum full-load current for a window air conditioner connected on a 20-ampere branch circuit that supplies other loads?
A. 10
B. 15
C. 12
D. 16
10
A two terminal pair of network of a transmission line can be represented by a
I. pi network
II. T network
A. II only
B. Either I or II
C. I only
D. Both I and II
Both I and II
What is the purpose of reactor in short circuit?
A. To open the line in short circuit
B. To increase the current in short circuit
C. To lessen the current in short circuit
D. To decrease the circuit resistance
To lessen the current in short circuit
Peak load plants are designed to supply power at
A. low capital cost and low operating cost
B. low capital cost and high operating cost
C. high capital cost and high operating cost
D. high capital cost and low operating cost
low capital cost and high operating cost
A string efficiency of 100% means that
A. the potential across each disc is zero
B. potential across the large disc is very large
C. potential across each disc is the same
D. one of the insulator discs is shorted
potential across each disc is the same