ESXTOP Metrics Review Flashcards
Memorize Metrics
%USED
CPU use. The percentage of physical CPU core cycles used by a group of worlds running VMs, resource pools, or other worlds
%RDY:
Percentage of time that the VM was ready to run but was not provided CPU resources on which to execute.
%CSTP:
Percentage of time that the vCPUs of a VM spent in the co-stop state, waiting to be co-started. This value gives an indication of the co-scheduling overhead incurred by the VM. If this value is low, any performance problems should be attributed to other issues and not to the co-scheduling of the VM’s vCPUs.
%MLMTD:
Percentage of time that the VMkernel did not run the VM because that would violate the VM’s limit setting.
%VMWAIT:
Percentage of time that the VM spent in a blocked state waiting for events.
%SWPWT:
Percentage of time that the VM spends waiting for the VMkernel to swap memory.
NWLD:
Number of members in the VM of the world that is running.
MbTX/s:
Amount of data transmitted (in megabits) per second
MbRX/s:
Amount of data received (in megabits) per second
PKTTX/s:
Average number of packets transmitted per second in the sampling interval
PKTRX/s:
Average number of packets received per second in the sampling interval
%DRPTX:
Percentage of outbound packets dropped in the sampling interval
%DRPRX:
Percentage of inbound packets dropped in the sampling interval
ESXTOP
PMEM:
The total amount of physical memory on your host in megabytes.
ESXTOP
VMKMEM:
The memory that is managed by the VMkernel in megabytes.
ESXTOP
PSHARE:
The saving field shows you how much memory you saved because of TPS.
ESXTOP
Memory state:
This value can be high, clear, soft, hard, or low. This value refers to the current state of the VMkernel’s memory. This value also indicates whether the VMkernel has enough free memory to perform its critical operations.
ESXTOP
MEMCTL/MB:
This line displays the memory balloon statistics for the entire host.
ESXTOP
MCTL?:
This value, which is either Y (for yes) or N (for no), indicates whether the balloon driver is installed in the VM.
ESXTOP
MCTLSZ:
This value is reported for each VM and represents the amount of physical memory that the balloon driver is holding for use by other VMs.
ESXTOP
MCTLTGT:
This value is the amount of physical memory that the host wants to reclaim from the VM through ballooning.
ESXTOP
CACHESZ (MB):
Compression memory cache size
ESXTOP
CACHEUSD (MB):
Used compression memory cache
ESXTOP
ZIP/s (MB/s):
Compressed memory per second
ESXTOP
UNZIP/s (MB/s):
Decompressed memory per second
ESXTOP
LLSWR/s
is the rate (in MB) at which memory is read from the host cache.
ESXTOP
LLSWW/s
is the rate (in MB) at which memory is written to the host cache.
ESXTOP
SWR/s and SWW/s:
Measured in megabytes, these counters represent the rate at which the ESXi host is swapping memory in from disk (SWR/s) and swapping memory out to disk (SWW/s).
ESXTOP
SWCUR:
The amount of swap space currently used by the VM.
ESXTOP
SWTGT:
The amount of swap space that the host expects the VM to use.
CPU use. The percentage of physical CPU core cycles used by a group of worlds running VMs, resource pools, or other worlds
%USED
Percentage of time that the VM was ready to run but was not provided CPU resources on which to execute.
%RDY:
Percentage of time that the vCPUs of a VM spent in the co-stop state, waiting to be co-started. This value gives an indication of the co-scheduling overhead incurred by the VM. If this value is low, any performance problems should be attributed to other issues and not to the co-scheduling of the VM’s vCPUs.
%CSTP:
Percentage of time that the VMkernel did not run the VM because that would violate the VM’s limit setting.
%MLMTD:
Percentage of time that the VM spent in a blocked state waiting for events.
%VMWAIT:
Percentage of time that the VM spends waiting for the VMkernel to swap memory.
%SWPWT:
Number of members in the VM of the world that is running.
NWLD:
Amount of data transmitted (in megabits) per second
MbTX/s:
Amount of data received (in megabits) per second
MbRX/s:
Average number of packets transmitted per second in the sampling interval
PKTTX/s:
Average number of packets received per second in the sampling interval
PKTRX/s:
Percentage of outbound packets dropped in the sampling interval
%DRPTX:
Percentage of inbound packets dropped in the sampling interval
%DRPRX:
The total amount of physical memory on your host in megabytes.
ESXTOP
PMEM:
The memory that is managed by the VMkernel in megabytes.
ESXTOP
VMKMEM:
The saving field shows you how much memory you saved because of TPS.
ESXTOP
PSHARE:
This value can be high, clear, soft, hard, or low. This value refers to the current state of the VMkernel’s memory. This value also indicates whether the VMkernel has enough free memory to perform its critical operations.
ESXTOP
Memory state:
This line displays the memory balloon statistics for the entire host.
ESXTOP
MEMCTL/MB:
This value, which is either Y (for yes) or N (for no), indicates whether the balloon driver is installed in the VM.
ESXTOP
MCTL?:
This value is reported for each VM and represents the amount of physical memory that the balloon driver is holding for use by other VMs.
ESXTOP
MCTLSZ:
This value is the amount of physical memory that the host wants to reclaim from the VM through ballooning.
ESXTOP
MCTLTGT:
Compression memory cache size
ESXTOP
CACHESZ (MB):
Used compression memory cache
ESXTOP
CACHEUSD (MB):
Compressed memory per second
ESXTOP
ZIP/s (MB/s):
Decompressed memory per second
ESXTOP
UNZIP/s (MB/s):
is the rate (in MB) at which memory is read from the host cache.
ESXTOP
LLSWR/s
is the rate (in MB) at which memory is written to the host cache.
ESXTOP
LLSWW/s
Measured in megabytes, these counters represent the rate at which the ESXi host is swapping memory in from disk (SWR/s) and swapping memory out to disk (SWW/s).
ESXTOP
SWR/s and SWW/s:
The amount of swap space currently used by the VM.
ESXTOP
SWCUR:
The amount of swap space that the host expects the VM to use.
ESXTOP
SWTGT: