Equipment and Tool Safety

Question 1

When using hand tools, __________ lead to accidents.

instructions
PPE
SOP
distractions

Answer 1

distractions

Question 2

A light curtain is an example of a(n) __________ sensing restraint.

physical
holdback
electromechanical
presence

Answer 2

presence

Question 3

As a safety precaution, which of these should be chained to a rigid fixture?

forklift
Drill press
welder
compressed gas cylinder

Answer 3

compressed gas cylinder

Question 4

If an operator does not test equipment after it is locked out __________.

the circuit will not operate
they should apply a tag stating so
they should be retrained
it does not matter because the lockout prevents energizing the power

Answer 4

they should be retrained

Question 5

A __________ prevents a machine from operating without the proper guards in place.

safety trip
gate
machine interlock
lockout

Answer 5

machine lock

Question 6

A wrench applies __________ to the head of a threaded fastener to turn it.

Pressure
Compression
Ratchet
torque

Answer 6

torque

Question 7

Which of the following statements is not considered good safety practice for an operator working on a milling machine?

A. Clearing cuttings or chips with a cloth
B. Using compressed air below 30 psig to clean chips.
C. Using a brush to remove chips.
D. Using compressed air below 205 kPa to clean chips.

Answer 7

A

Question 8

There are __________ major types of guards.

six
three
five
four

Answer 8

4

Question 9

Safety glasses should be worn when __________.

using a drill press
driving heavy machinery
when using a mic
when working above someone

Answer 9

using a drill press