Engineering safety

Question 1

What does HASAW stand for

Answer 1

HEALTH AND SAFTEY AT WORK ACT

Question 2

With regards to PPE what do the regulations require

Answer 2

TO BE SUITABLE FOR USE
TO BE STORED & MAINTAINED CORRECTLY
IS USED CORRECTLY BY EMPLOYEES
ITS PROVIDED WITH INSTRUCTIONS ON HOW TO USE IT SAFELY

Question 3

Name x2 hazards with goggles , safety specs and visors protect us from

Answer 3

DUST 
PROJECTILES
CHEMICAL SPLASH 
RADIATION
GAS VAPOUR

Question 4

What does PUWER stand for?

Answer 4

PROVISIONAL USE OF WORK EQUIPMENT REGULATIONS

Question 5

What does COSHH stand for?

Answer 5

CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH

Question 6

What form identifies relevant information of a dangerous item of stores

Answer 6

HAZARD DATA SHEETS

Question 7

List x8 pieces of information found on a COSHH data sheet?

Answer 7

STORAGE METHODS
TRANSPORT METHODS
FIRST AID 
FIRE FIGHTING 
DISPOSAL GUIDES
HAZARD IDENTIFICATION OF THE PRODUCT
IDENTIFICATION OF THE PRODUCT
ACCIDENTAL RELEASE MEASURES 
TOXICOLOGICAL INFORMATION

Question 8

What does LOLER stand for ? and name x4 main requirements

Answer 8

LIFTING OPERATIONS LIFTING EQUIPMENT REGULATIONS

MARKED WITH SAFE WORKING LOADS
POSITIONED AND INSTALLED TO MINIMISE ANY RISKS
USED SAFLEY IN THE WORK PLACE
SUBJECT TO ONGOING EXAMINATION FOR FIT FOR USE BY COMPETENT PERSONNEL

Question 9

What additional safety equipment must be worn when involved in slinging operation?

Answer 9

HIGH VIS
HARD HAT
BOOTS
OVERALLS

Question 10

Describe the best lifting technique

Answer 10

KNEES BENT 
BACK STRAIGHT 
LOAD CLOSE TO YOU
DONT TWIST 
PLAN ROUTE 
KEEP VISION CLEAR 
USE ALTERNATIVE LIFTING AID IF POSSIBLE

Question 11

Define a confined space and name x2

Answer 11

A CONFINED SPACE IS A COMPARTMENT THAT HAS REMAINED CLOSED AND UNVENTED FOR MORE THAN 24HRS

FUEL TANK
BALLAST TANK
STP
FRESH WATER TANK

Question 12

Name x2 gases that the leader multi gas monitor measures ?

Answer 12

METHANE
H2S
OXEGEN

Question 13

Which law requires us to report work related death or injuries / illnesses and list x4 major reportable injures

Answer 13

RIDDOR

ELECTRICAL SHOCKS OR BURNS
AMPUTEES
LOSS OF SIGHT
ADMISSION TO HOSPITAL FOR MORE THAN 24HRS

Question 14

What precautions must be taken before accessing a confined space ?

Answer 14

COMPARTMENT TO BE COOL
VENTILATED FOR 24HRS
TEST THE ATMOSPHERE 
OBTAIN A GAS FREE CERTIFICATE 
CORRECT PPE

Question 15

State x4 restricted access compartments which may have specific entry?

Answer 15

BATTERY ROOMS
MAGAZINE STORES
PAINT SHOP
REFRIGERANT ROOMS 
FLAMMIBLE STORES

Question 16

When going into a refridergerant compartment on rounds which device is taken with you to measure gas levels?

Answer 16

A REFRIGERANT GAS MONITOR

Question 17

What PPE is required for entering a machine space

Answer 17

BOOTS
OVERALLS
HEARING PROTECTION

Question 18

As a hot work sentry which items are to be taken to the hot work area and worn by the hot work sentry?

Answer 18

WELDERS GOGGLES 
X2 FIRE EXTINGUSHERS 
RADIO FOR COMMUNICATION
FIRE RETARDENT BLANKET 
SURCOAT MARKED SENTRY

Question 19

What are the actions and responsibility’s of a welding sentry before hot work commences?

Answer 19

REMOVE COMBUSTIBLE MATERIALS
COVER ELECTRICAL INSULATION
CLEAR UP ANY OILY BILLGES
REMOVE AND PACKING MATERIALS

Question 20

What part of the permit to work log must be completed prior to commencement of welding / burning and by whom

Answer 20

HOT WORK CERTIFICATE 
WELDER
SENTRY
OOW/OOD
DMSER
DWESR

Question 21

What PPE is to be worn when working with lagging

Answer 21

SKULL CAP
BOOTS
GLOVES 
GOGGLES
RESPIRATOR
GREEN NYLON OVERALLS

Question 22

If lagging has occurred what must be in place before personnel can re-enter the compartment?

Answer 22

DUST FREE CERTIFICATE

Question 23

What are designated ALOFT areas

Answer 23

FUNNELS
MASTS
SHIPS SUPER STRUCTURES
SUBS CONNING TOWERS

Question 24

Whilst the ship is along side who is in charge of the hazard state board ?

Answer 24

OFFICER OF THE DAY

Question 25

After completing the SHIPHAZ procedure with the OOD prior to going aloft what else must we do to ensure our and others personnels safety

Answer 25

Non slip footwear
Tools on lanyards
Get a sentry who is in communication with scc.

Question 26

What is LOTO

Answer 26

LOTO IS LOCK OFF TAG OUT

A METHOD OF SAFELY ISOLATING SYSTEMS ELECTRICALLY AND MECHANICALLY

Question 27

What are the x4 reasons for conducting a LOTO

Answer 27

ALLOW MAINTENANCE WITHOUT HAZARD TO THE MAINTAINER OF THE EQUIPMENT.

IF THE EQUIPMENT IS DEFECTIVE

WHERE EQUIPMENT HAS YET TO BE FITTED

PREVENTION OF SELECTION OF A MODE OF OPERATION WHICH MAY BE UNAVAILABLE

Question 28

What happens on completion of welding

Answer 28

SENTRY TO STAY IN PLACE FOR 20mins.

THEN DO AN INSPECTION

INFORM OFFICER OF THE DAY / WATCH

INFORM THE DMSER AFTER THE WORKING DAY

Question 29

Divers Down Precautions

Answer 29

SHAFT BRAKE ON
STEERING GEAR ISOLATED
ALL SONAR DEVICES SHUTDOWN
ANY DISCHARGING IN THE VICINITY TO BE ISOLATED.
SW PRESSURE TO BE REDUCED
STABILERS TO BE ISOLATED 
CATHODIC PROTECTION LOCKED OFF
CPP TO BE SHUTDOWN

Question 30

X4 examples of hot work

Answer 30

WELDING
GAS BURNING
BRAZING
GRINDING

Question 31

Precautions When working in a confined space.

Answer 31

NO SMOKING
SENTRY AT SPACE
COMMUNICATION BETWEEN PERSONNEL IN SPACE.
SENTEY TO HAVE AVAILABLE SUMMON ASSISTANCE.
BA AVAILABLE
LIFE LINE FOR PEOPLE IN THE SPACE.
GAS MONITOR TO BE USED.

Question 32

What are the x7 considerations which must be conducted as part of the loto process

Answer 32

All normal alternative isolation points been identified

Obtain permission from senior rates

All end users who maybe affected to be informed

A separate loto form is to be filled in for each individual isolation point.

The next sequential number is to be identified from the loto log index

All details to be completed in the front of the loto log.

All the loto information is to be recorded on a loto safety certificate.