Emergency Equipment Preflight

Question 1

Ancillary Kit

Answer 1

verify presence and ensure kit is sealed

Question 2

AED

Answer 2

verify presence of AED
Ensure it is secure in its housing
(remove) Verify presence of green or yellow seal and status of AED
Verify green status indicator light is blinking

Question 3

CRJ Lav fire extinguisher

Answer 3

verify the two discharge nozzles are black and/or sealed

Question 4

CRJ Lifelines

Answer 4

Verify presence

Ensure lifeline is secure in its compartment with velcro strap and the snap hook is attached to the end of the lifeline

Question 5

Emergency flashlight

Answer 5

ensure red light is illuminated

Question 6

EMB Under sink lav fire extinguisher

Answer 6

verify that the gauge is in the green zone

Question 7

ERJ 175 lab fire extinguishers

Answer 7

verify that the gauge is in the green zone

Question 8

ELT

Answer 8

Verify presence

Question 9

EMK

Answer 9

Check for presence of the kit

Verify green seal on compartment 1 and verify green seal on compartment 2

Question 10

First Aid Kit

Answer 10

Check for presence of kit

Ensure seal is intact

Question 11

Grab-N-Go Kit

Answer 11

Verify Presence

Ensure kit is sealed

Question 12

Halon Fire Extinguishers– ring pin

Answer 12

Check that the pressure gauge needle is in the green area and for presence of pin and seal
ensure secured in bracket

Question 13

Halon fire extinguisher– plug type

Answer 13

check for presence of pin and seal.

ensure secured in bracket

Question 14

Infant life vest

Answer 14

Verify presence
EMB + CRJ (5)
ERJ 175 (8)

Question 15

Crew Life vest

Answer 15

Verify presence

Question 16

Megaphone CRJ

Answer 16

verify presence and ensure it is secure in bracket

Question 17

Megaphone ERJ 175

Answer 17

secured in bracket

squeeze handle to verify an audible click

Question 18

O2 tool

Answer 18

verify presence

Question 19

PBE

Answer 19

verify in housing unit
Verify seal is intact on plexiglas cover
Ensure humidity indicator is blue
Verify that the vacuum seal of the foil pouch appears compressed around the unit

Question 20

POB (EMB)

Answer 20

ensure secured in bracket
ensure mask is attached
ensure mask and tubing are in good condition
Verify PSI is not below 1200

Question 21

POB (CRJ)

Answer 21

ensure secured in bracket
ensure mask is attached
ensure mask and tubing are in good condition
Verify PSI is not below 1600

Question 22

ERJ 175 POB

Answer 22

Ensure secured in proper location
Ensure gauge needle is in red full band
both masks and tubing are in good condition
one mask is attached to high flow outlet and protective plug is covering unused outlet