emergency equipment Flashcards
What is the first step in the Halon pre-FLT check?
The pressure gauge is in the green zone.
What must be checked regarding the ring pin in the Halon pre-FLT check?
The ring pin is in place through the handle and lever.
What does the Halon extinguisher need to be in during the pre-FLT check?
Anchored in the regular position.
List the steps for using a Halon extinguisher.
- Pull out the safety pin
- Hold the extinguisher upright
- Direct the nozzle at the source of the fire
- Squeeze the lever firmly
What is the effective distance and time for Halon?
2~5 meters / 10 sec
What is the effective distance and time for Halon Free?
1.5~2 meters / 9~10 sec
What should be done if a seal on the Halon extinguisher is found broken or missing?
Inform maintenance and report to CP to log in the deficiency log.
What is the first step in the Water extinguisher pre-FLT check?
It must be anchored in the regular position.
What must be checked regarding the safety wire in the Water extinguisher pre-FLT check?
The safety wire must be in place.
What is the first action to take when using a Water extinguisher?
Turn the handle all the way to the right.
What should you avoid using a Water extinguisher on?
Electrical fire or liquid fire (grease or fuel)
What is the effective time for a smoke hood?
20 min
What is the first step in preparing to wear a smoke hood?
It must be fastened in the regular position.
What should be removed before wearing a smoke hood?
The lipstick
What is the sequence of actions to take when using a smoke hood?
- Open the box and take out the smoke hood
- Pull the red string.
- Take the hood out of the plastic bag
- Spread the hood and slip it over your head
- Adjust the fitting and pull the cord in front to start the generator
- Tie the waist strap
