ELECTRICITY Flashcards

1
Q

Type name of Moisture and Heat Resistance cross linked with Thermosetting Polyethylene

A

XHHW

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Name of First electricity company in the Philippines

A

La Electricista

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

_________ is the strength of an electric current in amperes

A

Amperage

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

It is used where it is desired to control lamps from two different points, as in a stairwell

A

Three-way switches

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Voltage, Nominal. A nominal value assigned to a circuit or system for
the purpose of conveniently designating its voltage class (e.g.,120/240
volts, 480Y/277 volts, 600 volts). The actual voltage at which a circuit
operates can vary from the nominal within a range that permits
satisfactory operation of equipment.

A
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Identify which system’s provide power to selected loads not directly involved with life safety, such as, water and sewage treatment plants and industrial machines for manufacturing processes

A

Standy System

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the best material for high voltage installation ?

A

Ceramic

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Amperes is the measure of current. It is basically the movement of power per second. (True or false)

A

False, it represents the rate of flow of one coulumb (6.25x10^18) electrons per second through a given across section

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

_____ lighting is a method of lighting where light fixtures attached anywhere on a continuous track device which contains electrical conductor.

A

Track lighting

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

15 A and 20 A receptacles should be grounded. (True or false)

A

True

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

Bathrooms.
In dwelling unit, at least one receptacle outlet should be installed in bathrooms within ____ mm of the outside edge of each basin. The receptacle outlet should be located on a wall or partition that is adjacent to the basin or basin countertop

A

900mm

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

What year was the first Philippines tramway system introduced?

A

1903

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

They are sometimes called rockers, dimmers, or throws. Depending on how they operate, but still they are just refer to the number of light switches on the plate

A

Gang

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What is the wiring device in which the utilization of equipment (appliance) cord is plugged into.

A

Receptacle

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

The wattage in a circuit is anything that uses some of the power from cell. In a parallel circuit, the components are arranged in individual paths. (True or false)

A

False. It is in series circuit that are arranged in individual paths.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Height of working space.
The work space should be clear and extend from grade, floor, or platform to the height required by Table 01.
Within this requirement, other equipment that is associated with the electric installation and is located above or below the electrical equipment shall be permitted to extend not more than ____ mm beyond the front of the electrical equipment.

A

150mm

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

What is an electromechanical devices that senses heat?

A

Thermal pigtail

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

With of working Space.
The width of the working space in front of the electric equipment shall be the width of the equipment or 750mm, whichever is greater. In all cases the work place shall pemit at least 90 degrees opening of equipment doors or hinged panels. (True or false)

19
Q

This determines the amount of electric current a wire can safely carry, as well as its electrical resistance and weight..

A

Wire diameter

20
Q

What is silver good at?

A

Best in electrical conductor, conductivity

21
Q

What is a point in an electrical system at which current is taken to supply utilization equipment.
It refers only in the box.

22
Q

How many light customer was served by the first electric company?

23
Q

Who is the entrepreneur who won the bidding for the first manila electric tramway?

A

Charles M. Swift

24
Q

What year was the first electric company started in PH?

25
What is a central storage batteries are mounted in individual racks and always provided with automatic charging equipment?
Battery Equipment
26
What is glass good for?
Best Insulator, high resistivity
27
What happen between the first electric company and first tramway system in 1919?
Merger, naging Manila electric Railroad and light Company (MERALCO)
28
Transformers can also be used in isolation, where the voltage in greater than the voltage out, with separate coils not electrically bonded to one another. (True or false)
False
29
Which system provides electric power and illumination essentially for life safety and protection of property during an emergency?
Emergency System
30
High-power resistors can be dissipate many watts of electric power as heat, may be used as part of motor controls, in power distribution system, or as test loads or for panelboard. (True or false)
False
31
Flexible metal conduit (FMC) is also called___
Greenfield
32
Voltage, Nominal. A nominal value assigned to a circuit or system for the purpose of conveniently designating its voltage class (e.g.,120/240 volts, 480Y/277 volts, 600 volts). The actual voltage at which a circuit operates can vary from the nominal within a range that permits satisfactory operation of equipment. (True or false)
True
33
Faraday's law of induction, discovered in 1831, describes the induced voltage effect in any coil due to a changing magnetic flux encircled by the coil. (True or false)
True
34
What are devices for making, breaking, or changing conditions in an electrical circuit under the conditions of load which they are rated.
Switch
35
What is a device consisting of an alloy link of wire with a low melting temperature which is inserted in the circuit, in such a way, that all current which passes through the circuit, must also pass through this metal?
Fuse
36
In a series circuit, the amperage at any point in the circuit is the same (True or false)
True
37
What are the primary mover in metals; however, other devices such as the cationic electrolyte(s) of a battery, or the mobile protons of the proton conductor of a fuel cell rely on positive charge carriers?
Electrons
38
The voltage is indirectly proportional to the number of windings or turns (True of false)
False
39
Identity the trade name of TW
Moisture Resistant Thermoplastic
40
.What is an over current protective device that will provide ground fault protection as well as function as an ordinary circuit breaker? (in full words)
Ground fault Circuit Interrupter
41
The service panel will contain a "main" fuse or circuit breaker, which controls all of the electric current entering the building at once, and a number of smaller (True or false)
True
42
The lower the gauge number, the thicker the wire. (True or false)
True
43
What is popularly known as “panel” or “electrical panel”, it is simply the box wherein the protective devises are housed from which the circuits and bus bars terminate?
Panelboard
44
Countertops. In kitchens and dining rooms of dwelling units, a receptacle outlet shall be installed at each wall counter space that is 500 mm or wider. (True or false)
False, 300mm