Electrical in CET

Question 1

What circuit type is the default option in CET?

Answer 1

3+1

Question 2

What box need to be CHECKED PRIOR TO PLACING a receptacle to force a Power Harness in a specific panel.

Answer 2

Utilize Harness

Question 3

______ _________ will not work after placing Receptacles.

Answer 3

Utilize Harness

Question 4

Common routing mistakes may require a Pass-Thru with Power Block to be changed to a _______ _______ for power to route correctly.

Answer 4

Power Harness

Question 5

To specify On Module Pass-Thru, this option must be selected ______ to using “Auto-Route Power.”

Answer 5

Prior to using “Auto-Route Power.”

Question 6

What pass thru can be helpful when future reconfiguration is part of a clients long-term furniture plan?

Answer 6

On Module Pass-Thru

Question 7

By matching the width of the pass-thru to the width of the panel….

Answer 7

…On Module Pass-Thru can be helpful when future reconfiguration is part of a client’s long-term furniture plan.

Question 8

________ ________ is used when placing receptacles and will include at least one ________ __________.

Answer 8

Utilize Harness, Duplex Receptacle.

Question 9

What harness is essentially hidden in the panel to route power and provide flexibility for future reconfiguration?

Answer 9

Power Harness. In CET it will place a Power Harness in a pane without any Receptacles.