Electrical Emergency Procedures

Question 1

Electrical Power Failure/ Dual Generator Failure

1 W, 1 N

Answer 1

1) Safe Altitude and Airspeed- Establish
2) Stabilator- Check position, slew as required.

Warning- Ensure Airspeed versus stabilator angle limits are not exceeded. Stabilator automatic mode is inoperative.

Note- The stabilator position indicator will be inoperative with no power to the AC essential bus. Attempt to check visually.

3) APU Emergency start procedure- Perform
4) CMPTR PWR, SAS 1, SAS 2, TRIM, AUTO PLT, STABILATOR AUTO CONTROL- ON

Question 2

Dual-EGI Failure

Answer 2

1) Backup instruments- Scan, as required.

2) #1 and #2 EGI PWR switches- OFF, then ON.

Question 3

FLIR Uncommanded Lasing

Answer 3

1) ACI MASTER ARM - SAFE
2) LASER SELECT - SAFE

If lasing continues:

3) FLIR - OFF

Question 4

Hellfire Missile Hangfire

1 W

Answer 4

1) Adjust controls as required to maintain straight- and- level flight.

Warning- 30 minute thermal battery, weapon becomes INERT.