Electrical Flashcards
What is the minimum battery voltage for APU start?
()19 volts
()23 volts
()28 volts
23v
Primary electrical power is provided by ______ engine driven integrated drive generators (IDGs).
()3
()2
()4
2
What occurs when a source of power is connected to a bus system?
()It automatically accepts the most powerful source
() It automatically disconnects an existing source
() the sources are paralleled and then accepted
it automatically disconnects an existing source
A GRD POWER AVAILABLE light provides flight deck indication that AC ground power is ____________________.
() connected to the aircraft and meets aircraft power quality standards
() connected to the aircraft and may or may not meet aircraft power quality standards
() is powering the main bus
connected to the aircraft and meets aircraft power quality standards
Which of the following will automatic load sensing shed first during single generator (engine generator) operations?
() Galleys and main bus on Transfer Bus 1
() In Flight Entertainment (IFE) busses
() Galleys and main bus on Transfer Bus 2
Galleys and main bus on Transfer Bus 2
The amber DRIVE caution light is illuminated when ____ oil is sensed in the IDG
() high
() low
() all answers are correct
low
After the IDG disconnect switch is used to disconnect the IDG from the engine, it _________ possible to reactivate the IDG in flight.
()is
()is not
is not
On the ground, an amber _______ light illuminates to indicate the DC system or standby system equipment has failed. This light is inhibited in flight.
() ELEC
() TR UNIT
() BAT DISCHARGE
elec
Inflight, an amber TR UNIT light illuminates _________.
() TR1 or TR2 and TR3 has failed
() TR1 or TR2 or TR3 has failed
() all TRs have failed
TR1 or TR2 and TR3 has failed
An amber BAT DISCHARGE light illuminates when _________.
() a thermal runaway is occurring
() excessive battery discharge is detected
() the battery has failed
excessive battery discharge is detected
An illuminated STANDBY Power (PWR) OFF Light indicates one or more of the following buses are unpowered.
() AC standby bus, DC standby bus
() battery bus
() all answers are correct
All answers are correct
AC standby bus, DC standby bus
battery bus
Maintenance (MAINT) Test Switch on the AC and DC Metering Panel is typically used by ________.
() flight attendants
() maintenance
() pilots
maintenance
What is the function of the DC Meters Selector?
() selects the AC source for the DC Voltmeter and the AC Ammeter indications
() selects the DC source for the DC Voltmeter and the DC Ammeter indications
() selects the Standby Battery static inverter AC Ammeter indications
selects the DC source for the DC Voltmeter and the DC Ammeter indications
What is the function of the AC Meters Selector?
() selects the AC source for the AC Voltmeter, AC Ammeter and frequency meter indications
() selects the DC source for the AC Voltmeter and the DC Ammeter indications
() selects the Standby Battery static inverter AC Ammeter indications
Selects the AC source for the AC Voltmeter, AC Ammeter and frequency meter indications
What light on the overhead panel illuminates if the transfer bus is not being powered?
()Transfer bus off
()DRIVE
()ELEC
TRANSFER BUS OFF