Edgers, Tracers, & Overview of Edging Procedures W3 Flashcards
part of the tracing unit that traces the frame/lens opening.
Stylus
If a pattern is made for use with the boxing system, at which of the following will it have its central hole?
At the boxing center
Frame difference =
A-B
Which settings will control the water flow in the edger
Lens material setting
Mimics the lens edge design but creates a high luster on the edge of the lens.
Polishing Wheel
Creates the final lens edge design (flat or beveled edge).
Finishing Wheel
Flat wheel with the coarsest grit, removes the majority of lens size
Roughing Wheel
trace the frame
layout/block the spotted lens
set up the edger with job parameters
edge the lens
clean and insert/mount lens in frame
standard align the frame
inspect finished product
verify accuracy in the lensometer
trace the frame
layout/block the spotted lens
set up the edger with job parameters
edge the lens
clean and insert/mount lens in frame
standard align the frame
inspect finished product
verify accuracy in the lensometer
To determine the A and B dimensions of the frame.
To gather shape data and transfer it to a patternless edger at a wholesale lab.
To determine the DBL of the frame.
To gather shape data and transfer it to a patternless edger directly wired to that edger.
To allow the collection of three-dimensional frame information to better locate the bevel onthe edge of the lens
Functions of frame tracer
Measuring the A dimension of the pattern
Pattern’s size is determined by
First patternless edger in US
1987
Patterned edger invented in
Early 1900’s
What to do when tracing nylon mount frame
lensmeter: the frame table ensures the frame is held straight and the spotting device marksthe 180 alignment of the lens.
another name for a demo (“dummy”) lens
Coquille