Driving and Controls

Question 1

If the engine fails to start within____ ,release the starter button and
allow the starting motor to cool for approximately ____ before trying again.

Answer 1

15 seconds

Question 2

If the engine fails to start after ___attempts, an inspection should be made to determine the cause.

Answer 2

four

Question 3

there is no oil pressure (at least ___ at idle) within ___, stop the engine and check the lubricating system.

Answer 3

12 psi / 10 to 15 seconds

Question 4

The oil pressure should not fall below ____ and normal operating pressure should be higher.

Answer 4

28 psi at 1800 rpm

Question 5

Try not to shut down the engine unless coolant temperature is ___ degrees Fahrenheit or less.

Answer 5

195

Question 6

In the event that air brake system pressure drops below approximately ___ psi, an audible alarm will sound, the PIC “warning” icon will illuminate red, and the PIC display will indicate what system is low on air.

Answer 6

60

Question 7

As soon as system air pressure increases past ___ psi, the warning light, alarm, and display will cease.

Answer 7

60

Question 8

The Telma dash level switch allows the operator to select ___ levels of retarding force for any given situation.

Answer 8

one of four

Question 9

The load manager will check voltage every ___ seconds.

Answer 9

30