Dash One Tidbits

Question 1

Full TAKEOFF and LANDING CHECKLISTS shall be completed prior to:

Answer 1

the initial takeoff and landing

Question 2

In regards to abbreviated landing checks, a “configuration change” is defined as:

Answer 2

A change to the landing gear position, parking brake setting, or nosewheel lock setting.

Question 3

Abbreviated TAKEOFF checks:

Answer 3

NR switch
Center Instrument Panel

(visually scan PFD, EICAS, landing gear, electrical panel, and fire/fail lights)

Question 4

Abbreviated LEVEL OFF checks:

Answer 4

RADALT
Center Instrument Panel

(visually scan PFD, EICAS, landing gear, electrical panel, and fire/fail lights)

Question 5

Abbreviated 200-Foot checks:

Answer 5

NR
Wheels
Floats
Sliding Door

(if over water, the sliding door -should- be open when the floats are armed below 200’ AWL and below 40 KIAS)

Question 6

“Good indications” during ENGINE RINSE procedure:

Answer 6

Ensure N1 of idled engine does not decrease more than 10 percent and TOT of idled engine decreases at least 25*C

Question 7

If TOT does not rise sufficiently during FFD checks, a repeat check of the P3 valve is conducted by:

Answer 7

With heat OFF and TRNG switch to IDLE,

increase collective until TOT reaches 700* OR BLEED AIR LIGHT EXTINGUISHES