Cycle Of Operations

Question 1

Firing

Answer 1

Press Trigger- Trigger cam hits trigger bar. Trigger pushes down on sear stud. Releasing firing pin extension from sear notch. Allowing firing pin to protude from T- Slot. This strikes the primer and sends the round down range. Complete

Question 2

Unlock

Answer 2

First Breechlock cam with assistance fromBreechlock depressors out of bolt recess complete

Question 3

Extracting

Answer 3

Extracting happens in two places as blot moves to plear. Allleorator tips hit bottomside of blot pushing bolt to rear. Allowing my extractor arm to remove round from feedway and T-slot to remove casing from chamber

Question 4

Cocking

Answer 4

As blot continues to rear. Cocking lever is pushed foward by u-slot. Reconnecting firing pin extenision to sear notch

Question 5

Ejecting

Answer 5

As bolt continues to rear. Extractor lug rides down Extractor switch with help of top cover cam placing new round on T-slot. And pushing the old round out of the Ejection port on bottom of recibver

Question 6

Feeding

Answer 6

Round Placed on T- slot in prep to chamber. Advacement of rounds on feedway. Drive spring rod is compressed, Counter- recoil begins

Question 7

Chambering

Answer 7

Extractor arm momentarily holds round on T-Slot drive spring pushes round foreword

Question 8

locking

Answer 8

as bolt continues forward breechlock rides up into breechlock cam in bolt recess