Custom 75 console Flashcards
Is the EQ module pre or post insert
Pre
Can the EQ module be applied to the monitor path
No
Is the direct out pre or post pan?
PRE - Fuck knows how that works
Does the transformer apply to the retro or modern output?
Retro (Think it transforms the mix)
Does the transistor apply to the retro or modern output?
Modern
Can panning be used in the monitor path?
Yes - thats what the separate pan pots above are for
Is the mix bus compressor pre or post insert
Pre
Is the pan pre or post fader?
POST
Is the cut pre or post the direct out?
Pre - otherwise it would not be able to cut anything
Is the channel path meter pre or post fader
Post - no signal goes in control room if the fader is down
Is the direct out meter pre or post fader
Pre fader - otherwise it would not show you anything
Are the auxes pre or post EQ?
Post - Otherwise the EQ sound would not pass through the aux
How many reverb returns are there?
4
How many headphone sends are there on the c75?
2
Can you use the EQ on PFL
Yes, think about all the sessions you have done with them in the work
On the console, what do the red rotatory pots do?
This is the monitor path
On the console, what do the red rotatory pots do when in FADER swap?
They become the channel path (Direct out)
What does it mean when an aux pot is set to MON?
It means it is being fed from the monitor path
If an aux is set to PRE fader with a reverb on it, when the fader of the channel is down, what will happen?
The reverb will remain playing
If an aux us set to POST fader with a reverb on it, when the fader of the channel is down, what will happen?
No sound will emit
