Configuring the Network Flashcards
1
Q
What are the 3 essential steps to setup prior to a deployment/installation?
A
Create:
- Labels
- Deployment Profiles
- Business Intent Overlays
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/191/930/a_image_thumb.jpg?1591216999)
2
Q
What data is stored in a deployment profile?
A
Includes Mode and Interface Configuration
Does not include IP addresses.
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/194/140/a_image_thumb.jpg?1591217291)
3
Q
When appliances are behind a 1-to-1 NAT, what needs to be set in the deployment profile?
A
Set NAT flag so unit outside the NAT device knows what address to address traffic to in order to reach the device behind the NAT.
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/194/363/a_image_thumb.jpg?1591217412)
4
Q
How do you configure VLAN tagging on the Silver Peak device?
A
see image
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/194/651/a_image_thumb.jpg?1591217683)
5
Q
What are WAN Cross Connect Groups?
A
If these boxes are checked, tunnels will be generated between these interfaces on various devices.
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/194/738/a_image_thumb.jpg?1591218507)
6
Q
What are the 4 Link Bonding Policies?
A
- High Availability (HA)
- High Quality (HQ)
- High Throughput (HT)
- High Efficiency (HE)
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/195/841/a_image_thumb.jpg?1591218720)
7
Q
What is the data flow order?
A
- 1st Packet ID
- Match the overlay traffic
- Passthrough or tunnel traffic decision
- transmit to destination
![](https://s3.amazonaws.com/brainscape-prod/system/cm/313/251/882/a_image_thumb.jpg?1591284269)