Comandos CDP/LLDP/PoE Flashcards
Display CDP neighbor information.
Switch# show cdp neighbors [type member/
module/number] [detail]
Control CDP operation globally.
Switch(config)# [no] cdp run
Control CDP operation on an interface.
Switch(config-if)# [no] cdp enable
Display LLDP neighbor information.
Switch(config)# show lldp neighbors [type
member/module/number] [detail]
Control LLDP operation globally
Switch(config)# [no] lldp run
Control LLDP operation on an interface.
Switch(config-if)# [no] lldp {receive |
transmit}
Set PoE behavior.
Switch(config-if)# power inline {auto | static} [max milliwatts]
Disable PoE on a switch port
Switch(config-if)# power inline never
Display PoE status
Switch# show power inline [type member/
mod/num] [detail]