Codes and Standards Flashcards
16 CFR 1201
Safety standard for architectural glazing materials, 2012 US government printing office, Washington DC
40 CFR 50
National ambient air quality standards, 2013. US government printing office, Washington dc
40 CFR 59
National volatile organic compound emission standards for consumer and commercial products, 2012. US government printing office, Washington dc
ADA/ABA
Guidelines: Americans with disabilities act and architectural barriers act accessibility guideline, 2005, revised 2010 US access board, Washington dc
ANSI A108
Specification for installation of ceramic tile, 2013. Tile council of north America, Anderson, sc
ANSI Z97.1
Safety glazing materials used in buildings - safety performance specifications and method of tests, 2009. American national standards institute, Washington dc
ANSI/ASHRAE Standard 62.1
Ventilation for acceptable indoor air quality, 2010. American society of heating, refrigerate and air conditioning engineers,Atlanta, ga,
ANSI/ASHRAE Standard 62.2
Ventilation and acceptable indoor air quality in low rise residential buildings, 2010. American society of heating, refrigerating and air conditioning engineers,Atlanta, ga,
ANSI/ASHRAE/IES Standard 90.1
Energy standard for buildings except low rise residential buildings, 2010. American society of heating, refrigeration and air conditioning engineers, atlanta, ga
ANSI/ASHRAE/USGBC/IES Standard 189.1
Standard for the design of high performance green buildings except low rise residential buildings, 2011. American society of heating, refrigeration and air conditioning engineers, atlanta, ga
ANSI/BIFMA M7.1
Standard test method for determining VOC emissions from office furniture systems, components and seating, 2011. Business and institutional furniture manufacturers association (BIFMA) international, grand Rapids, mi,
ANSI/BIFMA X5.1
American national standards for office furnishings - general purpose office chairs. 2011. Business and institutional furniture manufacturers association (BIFMA) INTERNATIONAL, grandRapids, mi,
ANSI/BIFMA X5.3
American national standards for office furnishings - vertical files, 2007 (BIFMA) international, grand rapids, mi
ANSI/BIFMA X5.4
American national standard for office furnishings - lounge seating, 2012. BIFMA international, grand rapids, mi
ANSI/BIFMA X5.5
American national Standard for office furniture - desk products, 2008
ANSI/BIFMA X5.6
American national Standard for office furnishings - panel systems, 2010.
ANSI/BIFMA X5.9
American national Standard for office furnishings - storage units, 2012
ANSI/BIFMA X7.1
standard for formaldehyde and TVOC emissions of low emitting office furniture systems and seating, 2011
ANSI/BIFMA/SOHO S6.5
american national Standard for office furnishings - small office/ home office, 2008
ANSI/BOMA Z65.1
Office buildings: standard methods of measurements, 2010. Business owners and managers administration (BOMA) INTERNATIONAL, WASHINGTON, DC
ANSI/UL 10B
Standard for fire tests of door assemblies, 2008. Underwriters laboratories, Northbrook, Illinois
ANSI/UL 10C
Standard for positive pressure fire tests of door assemblies, 2009. Underwriter laboratories, Northbrook, Illinois
AQMD Rule 1113
Architectural coatings, 2011. South coatings, 2011. South coast air quality management district, diamond bar ca
AQMD Rule 1168
Adhesive and sealant applications, 2005. South coast air quality management district, diamond bar, ca
ASTM C423
Standard test method for sound absorption and sound absorption coefficients by the reverberation room method, 2009. ASTM International, west conshohocken, pa
ASTM C1028
Standard test method for determining the static coefficient of friction of ceramic tile and other like surfaces by the horizontal dynamometer pull- meter method, 2007. ASTM international, west conshohocken, pa
ASTM C1396
Standard specification for gypsum board, 2013. ASTM International, west conshohocken, pa
ASTM D2047
Standard test method for static coefficient of friction of polished- coated flooring surfaces as measured by the James machine, 2011. ASTM international, west conshohocken, pa
ASTM D2261
Standard test method for tearing strength of fabrics by the tongue (single RIP) procedure (constant-rate-of-extension tensile testing machine), 2013. ASTM international
ASTM D2859
Standard test method for ignition characteristics of finished textile floor covering materials, 2011,
ASTM D3884
Standard guide for abrasion resistance of textile fabrics (rotary platform, double head method), 2009. ASTM international, west conshohocken, pa
ASTM D4157
Standard test method for abrasion resistance of textile fabrics (oscillatory cylinder method), 2010. ASTM international
ASTM D4966
Standard test method for abrasion resistance of textile fabrics (martindale abrasion tester method), 2012, ASTM international
ASTM D5116
Standard guide for small scale environmental change determination of organic emissions from indoor materials/ products, 2010. ASTM INTERNATIONAL
ASTM D6670
Standard practice for full- scale chamber determination of volatile organic emissions from indoor materials/ products, 2007. ASTM international
ASTM D6803
Standard practice for testing and sampling of volatile organic compounds (including carbonyl compounds) , emitted from paint using small environmental chambers, 2013. ASTM international
ASTM E119
Standard test methods for fire tests of building construction and materials, 2012. ASTM international
ASTM E136
Standard test method for behavior of materials in a vertical tube furnace at 750 degrees Celsius. ASTM international, west conshohocken, pa
ASTM E1333
Standard test method for determining formaldehyde concentrations in air and emission rates from wood products using a large chamber, 2010. ASTM international
ASTM E1353
Standard test methods for cigarette ignition resistance of components of upholstered furniture, 2008. ASTM international
ASTM E1991
Standard guide for environment life cycle assessment (LCA) of building materials/ products, 2005. ASTM international
Code of federal regulations
CFR
American disabilities act / architectural barriers act
ADA / ABA
American national standard institute
ANSI
American Society of heating, refrigeration, + air conditioning engineers
ASHRAE
Illuminating Engineering society
IES
US Green building council
USGBC
Business + institutional furniture manufacture society
BIFMA
Small office/home office
SOHO
Building owners + managers association
BOMA
Underwriters Labratories
UL
Air quality management district
AQMD
American society for testing + materials
ASTM
Clean air act
CAA
California technician bulletin
CAL TB
Gypsum association
GA
Green Seal
GS
International building codes
IBC
International code council
ICC
International energy conservation code
IECC
International green construction code
IgCC
National ambient air quality standard
NAAQS
National building code of canada
NBC
National fire protection association
NFPA
Toxic substances control act of 1976
TSCA
Uniform commercial code
UCC
ASTM E2114
Standard terminology for sustainability relative to the performance of buildings, 2008. ASTM international, west conshocken, pa
ASTM E2121
Standard practice for installing radon mitigation systems in existing low-rise residential buildings, 2012. ASTM international, west conshohocken, pa
ASTM E2129
Standard practice for data collectionfor sustainability assessment of building products, 2010. ASTM International, west conshohocken, pa
ASTM E2573
Standard practice for specimen preparation and mounting of site-fabricated stretch systems to assess surface burning characteristics, 2012. ASTM International, west conshohocken. Pa
ASTM E648
Standard test method for critical radiant flex of floor-covering systems using a radiant heat energy source, 2010. ASTM international, west conshohocken, pa
ASTM E662
Standard test method for specific optical density of smoke generated by solid materials, 2013. ASTM international, west conshohocken, pa
ASTM E84
Standard test method for surface burning characteristics of building materials, 2012. ASTM international, wc, pa
ASTM F609
Standard test method for using a horizontal pull slipmeter, 2005.
ASTM F462
Standard consumer safety specification for slip-resistant bathing facilities, 2007.
ASTM G155
Standard practice for operating xenon arc light apparatus for exposure of non-metallic materials, 2005.
BIFMA e3
Furniture sustainability standard, 2012. Business and institutional furniture manufacturers association international, grand rapids, mi
BIFMA G1
Ergonomics guidelines for furniture used in office work spaces designed for computer use, 2013. Grand rapids, mi
CAA
Clean air act of 1970. us environmental protection agency, Washington Dc
CAL TB 116
Requirements, test procedure and apparatus for testing the flame redardance of upholstered furniture, 1980.
CAL TB 117
Requirements, test procedure and apparatus for testing the flame retardance of resilient filling materials used in upholstered furniture, 2000.
CAL TB 133
Flammability test procedure for seating furniture for use in public occupants, 1991.
GA-214
Recommended levels of gypsum board finish, 2010.
GS-11
Paints and coatings, 2010. Green seal, Washington, dc
GS-13
Windows, 1995. Green seal, Washington, dc
IBC
International building code, 2012. International code council, washington, dc
ICC
International Fire code International mechanical code International plumbing code International residential code for one and two family dwellings Internatiinal zoning code
ICC 700
National green building syandard, 2012.
ICC A117.1
Accessible and usable buildings and facilities, 2009
IECC
International energy conservation code, 2012
IgCC
International green construction code, 2012
NAAQS
National ambient air quality standards, 2009
NBC
National building code of Canada, 2010
NFPA 13
Standard for the installation of sprinkler systems, 2013
NFPA 13D
Standard for the installation of sprinkler systems in one and two family dwellings and manufactured homes, 2013
NFPA13R
Standard for the installation of sprinkler systems in low rise residential occupancies, 2013
NFPA 70
National electrical code, 2011.
NFPA 80
Standard for fire doors and other opening protectives, 2013.
NFPA 101
Life safety code, 2012
NFPA 252
Standard methods of fire tests of door assemblies, 2012
NFPA 253
Standard method of test for critical radiant flux of floor covering systems using a radiant heat energy source, 2011.
NFPA 257
Standard on fire test for windows and glass block assemblies, 2012
NFPA 258
Recommended practice for determining snake generation of solid materials, 2001.
NFPA 260
Standard methods of tests and classification system for cigarette ignition resistance of components of upholstered furniture, 2013
NFPA 261
Standard method of test for determining resistance of mock-up upholstered furniture material assemblies to ignition by smoldering cigarettes, 2013.
NFPA 265
Standard methods of fire tests for evaluating room fire growth contribution of textile or expanded vinyl wall coverings on full height panels and walls, 2011.
NFPA 266
Standard method of test for fire characteristics of upholstered furniture exposed to flaming ignition source, 1998.
NFPA 286
Standard methods of fire tests for evaluating contribution of wall and ceiling interior finish to room fire growth, 2011.
NFPA 701
Standard methods of fire tests for flame propagation of textiles and films, 2010.
TSCA
Toxic substance control act of 1976.
UCC
Uniform commercial code, 2012
UL 723
Standard for test for surface burning characteristics of building materials, 2008
UL 1784
Standard for air leakage tests of door assemblies, 2004