CM2 Memory Checks Flashcards
Once the POB has been confirmed by the cabin crew, what are the CM2 actions?
Cockpit door:
CHECK CLOSED
CDLS:
SELECT ON
FAULT/OPEN lights:
EXTINGUISHED
Prior to starting an engine, what does CM2 need to check?
DOORS - CLOSED ENG Fuel Pump - ON ENG LO PRESS - EXTINGUISHED (Hotel mode) PROP BRK - ON START SELECTOR - AS REQ
What does the PF need to set up during the instrument and flight guidance set up on the ground?
NAV/COM TX TCAS EHSI/RMI AFCS - Altitude
During a turn around, what is the initial cockpit configuration completed by the CM2?
CLR CCAS ENG 1 and 2 Fire Tests No smoking and seat belts - ON Check Memo Panel - NO SMKG, SEAT BELTS, PROP BRK Set landing elevation RCDR GND CTL - ON ATPCS static test
Which engine start selector is used for the first flight of the day?
A and B
During the AFCS check, before propeller rotation, what do we set on the ADU?
HDG, LO BANK
IAS, (V2+5kts)
CPL, CM1
ENG start selector for northbound sectors?
A
After engine 1 start, and Np stabilised, what are CM2 actions?
AFCS CPL - PF
APM - Set 15T
APM - Set TOW
Reset Nav source for departure.
After executing a navigation change on the GNSS i.e. Direct to etc. what 3 things must be checked?
Selected point is magenta on GNSS and EHSI, and LNAV set.
When Np stabilises at ~15%, what are CM2 actions?
CL - AUTO
PEC - SGL CH (Callout)
Start Selector - OFF
LO Pitch - Check
ENG start selector for southbound sectors?
B
When passing transition, on climb and descent, what CHECKS does the PF complete?
Landing lights off, seat belts OFF (if safe), check pressurisation.
When you are asked for flaps 15, what is the speed limitation and what else is also selected?
185 KIAS.
PWR MGT - TO
When cleared to land, what is selected and by who?
Taxi and TO lights, ON
PM.
What are the climb procedure actions?
Set IAS above white bug, PLs notch, PWR MGT CLB, Bleed valves ON, Taxi and TO lights OFF, set IAS 170 KIAS.