CLI 1 Flashcards
mode where u can examine but not alter
user mode
Can reload from this mode
enable mode
move from enable mode to disable mode
disable
move from global config mode to enable mode
end or ctl-z
command which sets simple no user pass login
login
command which sets password for switch
password xxx
help for any command
?
move from enable to global config
conf t
line mode for all remote connections
line vty 0 15
move from global to interface config mode
int
from global to vlan config
vlan
Running conf is stored here
RAM
Stores backups and images of IOS
Flash Memory
Stores bootstrap and loads IOS into RAM
ROM
Stores startup config used when switch is powered on
NVRAM
What is held in NVRAM
startup config
WHat is held in RAM
running config
erase startup-config
erases startup config
erase nvram
write erase