ClearSCADA ViewX

Question 1

to configure a mimic you need to display it ______mode

Answer 1

Run mode

Question 2

outstation set is a database item that represents the communication between ClearSCADA and a device such as an SCADApack controller

Answer 2

True

Question 3

ViewX window typically contains the following components

Answer 3

Menus, icons, document display area, alarm banner, file tree and control bar

Question 4

When you create a Group in clearSCADA, the Group automatically contains a mimic which is named “default”. this is because many systems designers like to have an ______in each group

Answer 4

overview display

Question 5

By default scripting feature is turned off on mimics. Which one of the following procedures is used to enable this feature?

Answer 5

Double click on the background of the Mimic to display the Mimic properties window and on the Mimic tab, select the Enable check box in the script section

Question 6

Which one of the following Hot Key pop up event window on ClearSCADA system

Answer 6

F10

Question 7

You need to configure an outstation set to define each group of outstations that share the same channel(s) and uses the same protocol

Answer 7

True

Question 8

Which one is not a group type in ClearSCADA

Answer 8

I/O group

Question 9

Mimics are visual displays that provide a visual representation of plant, a geographical location, or a combination of information. Mimics normally not contain live data that is updated as

Answer 9

the state of the physical device change

Question 10

Which one is not “normal” data base points in clearSCADA

Answer 10

Low Limit values

Question 11

Once an alarm is acknowledged, this change in alarm causes the alarm to change color from Red to olive

Answer 11

True

Question 12

On a ViewX Client window, status bar is shown________by default

Answer 12

on the bottom of the viewx display

Question 13

You cannot delete the “Default” Mimics display in clearSCADA

Answer 13

false

Question 14

You need to configure a Point to represent each measuring instrument or control device that is connected to the channel

Answer 14

True

Question 15

Trends are graphical displays that plot the values of database items. They display data with the x-axis representing________and the y-axis representing

Answer 15

time, data value

Question 16

In ClearSCADA there are two different categories of database

Answer 16

true

Question 17

clearSCADA is not tested for, nor has any approval for use in, the control of safety-critical systems

Answer 17

true

Question 18

Not internal database point in ClearSCADA

Answer 18

Filed digital input

Question 19

For each advanced Modbus Driver, you need to configure an outstation to define each unit that obtains data from measuring devices and/or send instructions to controllable device

Answer 19

True

Question 20

ClearSCADA client provides only operator level access to the system and connect to one server at a time

Answer 20

Webx

Question 21

When you display the ClearSCADA object menu for a group or group instance, the options on the menu apply to the group, any subgroups within that group, and the items within that group and subgroups

Answer 21

true

Question 22

Microwave communication method, transmit data over radio waves whose waves lenghts are measured in small numbers of

Answer 22

centimeters

Question 23

To configure a direct channel on a clearSCADA system you need to know the type of

Answer 23

connection

Question 24

alarm activation

Answer 24

F9

Question 25

when an alarm is raise an operator first

Answer 25

acknowledge the alarm