Cisco 642-999 Parte 1

Question 1

The Cisco UCS administrator has the chassis discovery policy set to “2-link”. The administrator connects a new chassis to the Cisco UCS 6200 Series Fabric Interconnects using four links. Which option about link utilization is true?

Answer 1

The Cisco UCS will use two links until the chassis is reacknowledged, after which it will use all four links.

Question 2

What are the default settings of the Cisco IMCCIMC NIC properties on a standalone Cisco UCS Cseries server?

Answer 2

Dedicated’ NIC mode with ‘None’ NIC redundancy and DHCP enabled

Question 3

Which NIC redundancy modes allow the LOMs to be discovered by the operating system or hypervisor?

Answer 3

Dedicated mode

Question 4

Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server?

Answer 4

The two 1-Gb Ethernet ports

Question 5

Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)

Answer 5

1. • Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.
2. • A MAC forwarding table is not used to forward traffic to the uplink switch.

Question 6

What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect?

Answer 6

With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN.

Question 7

In a standalone Cisco UCS C-Series server, which recommendations can be used to upgrade the BIOS?

Answer 7

Cisco Host Upgrade Utility

Question 8

When upgrading a standalone Cisco UCS C-Series server, which method is correct?

Answer 8

Cisco Host Upgrade Utility

Question 9

Which two are true with respect to the unified ports on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)

Answer 9

1. • Ethernet ports must be grouped together in a block and must start with the first port and end with an odd numbered port.
2. • After making port mode changes on an expansion module, the module will reboot.

Question 10

What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect?

Answer 10

By default, all Fibre Channel ports are unconfigured.