chptr 10 dmv Flashcards
Even under the best conditions, ______ requires your full attention and your best judgment. When special conditions or hazards occur, attention and ______ become even more important. To be a good and safe _____, you must learn how to drive on expressways, at night, in bad weather and when an _________ occurs.
Even under the best conditions, driving requires your full attention and your best judgment. When special conditions or hazards occur, attention and judgment become even more important. To be a good and safe driver, you must learn how to drive on expressways, at night, in bad weather and when an emergency occurs.
RAILROAD CROSSINGS
Grade Crossings
A grade crossing is the _____ at which train tracks intersect with a roadway and is considered an __________. As you approach a crossing, always expect a _____. Trains can run on any track, at any time, from _____ direction. Never ____ a train to a crossing, never drive around _______ gates, and do not ___ on tracks. When crossing tracks, always stay in your ____ and in the same gear.
Some grade crossings have flashing ___ lights or lowering gates when a ____ approaches (“active” grade crossings). When approaching _____, or active, grade crossings, do not _______ until the gates are completely raised and the lights are off. It is illegal and dangerous to go around lowered _____ or to cross while the lights are still flashing.
Some grade crossing do not have gates or flashing lights. When approaching unmarked, or passive, grade crossings, slow down and be prepared to stop. Before you cross, be sure that a train is not coming. If you see a train coming, ____ until it passes, and then cross the tracks when it is safe to do so. If there are _____ tracks, wait until you can clearly see down all sets of tracks in both directions for another approaching train before crossing.
Remember that the train you see is closer and _____-moving than you think, and be aware that _____ cannot stop quickly.
RAILROAD CROSSINGS
Grade Crossings
A grade crossing is the point at which train tracks intersect with a roadway and is considered an intersection. As you approach a crossing, always expect a train. Trains can run on any track, at any time, from either direction. Never race a train to a crossing, never drive around lowered gates, and do not stop on tracks. When crossing tracks, always stay in your lane and in the same gear.
Some grade crossings have flashing red lights or lowering gates when a train approaches (“active” grade crossings). When approaching marked, or active, grade crossings, do not proceed until the gates are completely raised and the lights are off. It is illegal and dangerous to go around lowered gates or to cross while the lights are still flashing.
Some grade crossing do not have gates or flashing lights. When approaching unmarked, or passive, grade crossings, slow down and be prepared to stop. Before you cross, be sure that a train is not coming. If you see a train coming, wait until it passes, and then cross the tracks when it is safe to do so. If there are multiple tracks, wait until you can clearly see down all sets of tracks in both directions for another approaching train before crossing.
Remember that the train you see is closer and faster-moving than you think, and be aware that trains cannot stop quickly.
RAILROAD CROSSING
Railroad Crossing Warning Sign
COLOR: _____ with black letters “RR” and “_” symbol.
MEANING: There is a ________ crossing ahead. Use caution, and be prepared to ___. If you are following a __ or truck approaching a railroad crossing, be ______. Most buses and some trucks must stop at railroad crossings.
RAILROAD CROSSING
Railroad Crossing Warning Sign
COLOR: Yellow with black letters “RR” and “X” symbol.
MEANING: There is a railroad crossing ahead. Use caution, and be prepared to stop. If you are following a bus or truck approaching a railroad crossing, be careful. Most buses and some trucks must stop at railroad crossings.
RAILROAD CROSSING
Railroad Crossing Signals
Flashing red lights, lowered crossing gates and/or a ___ at a railroad crossing indicate that you must ___, at least __ feet (5 m) from the tracks. Do not go _____ the tracks until the lights and bell have _______ and the crossing gates are completely up. Do not ______ around or under a gate that is moving up or down.
Yield when you see a ______ sign, which is a sign shaped like an “_” with “RAILROAD CROSSING” printed on it. If there are _______ train tracks, the sign will show the number of tracks.
Look and listen for trains before crossing any railroad tracks. If an approaching train is near enough or going ____ enough to be a danger, you cannot go ______ the tracks, even if they have no signals or the signals are not working.
Do not, under any circumstances, attempt to cross any railroad tracks unless you are certain your entire vehicle will clear all of the tracks at the crossing. You cannot go across any railroad tracks unless there is ____ for your vehicle on the other side. If other _______ prevents you from going fully across, wait and go across only when there is room.
School buses with or ______ passengers, other buses with passengers on board and vehicles with ______ or flammable _____ must stop at all railroad crossings. Remember those rules if you are following one of these vehicles.
RAILROAD CROSSING
Railroad Crossing Signals
Flashing red lights, lowered crossing gates and/or a bell at a railroad crossing indicate that you must stop, at least 15 feet (5 m) from the tracks. Do not go across the tracks until the lights and bell have stopped and the crossing gates are completely up. Do not drive around or under a gate that is moving up or down.
Yield when you see a crossbuck sign, which is a sign shaped like an “X” with “RAILROAD CROSSING” printed on it. If there are multiple train tracks, the sign will show the number of tracks.
Look and listen for trains before crossing any railroad tracks. If an approaching train is near enough or going fast enough to be a danger, you cannot go across the tracks, even if they have no signals or the signals are not working.
Do not, under any circumstances, attempt to cross any railroad tracks unless you are certain your entire vehicle will clear all of the tracks at the crossing. You cannot go across any railroad tracks unless there is room for your vehicle on the other side. If other traffic prevents you from going fully across, wait and go across only when there is room.
School buses with or without passengers, other buses with passengers on board and vehicles with explosives or flammable cargo must stop at all railroad crossings. Remember those rules if you are following one of these vehicles.
RAILROAD CROSSING
Pavement Markings railroad crossing _______ marking
Sometimes, grade crossings do not have flashing ___ light signals or gates. Pavement markings will often show you that a grade crossing is ____. Stay behind the stop line while waiting for a train to ____.
RAILROAD CROSSING
Pavement Markings railroad crossing pavement marking
Sometimes, grade crossings do not have flashing red light signals or gates. Pavement markings will often show you that a grade crossing is ahead. Stay behind the stop line while waiting for a train to pass.
RAILROAD CROSSING
Stalling on Railroad Tracks
What should you do if you stall on the tracks, for any reason?
- GET ___! (That includes ________ in the car, children, babies, an elderly passenger, etc.)
- Get away from the tracks, even if you do not ___ a train.
- Locate the Emergency Notification System sign and call the number provided, telling them about the ______ vehicle.
Run toward the general direction the ______ is coming from. If a train is approaching, run toward the train but away from the tracks at a __-degree angle. If you run “down the track,” in the same direction as the train, you can be hit with ______ when the train hits your vehicle.
RAILROAD CROSSING
Stalling on Railroad Tracks
What should you do if you stall on the tracks, for any reason?
- GET OUT! (That includes EVERYONE in the car, children, babies, an elderly passenger, etc.)
- Get away from the tracks, even if you do not see a train.
- Locate the Emergency Notification System sign and call the number provided, telling them about the stalled vehicle.
Run toward the general direction the train is coming from. If a train is approaching, run toward the train but away from the tracks at a 45-degree angle. If you run “down the track,” in the same direction as the train, you can be hit with debris when the train hits your vehicle.
EXPRESSWAY DRIVING
“Expressway” means any ______ highway where traffic moves in one direction on ___ or more ______. You normally enter or exit the expressway on ______ (controlled-access). The speed limit is normally __ mph (88 km/h), but can be posted at __ mph (105 km/h) in some rural areas. Examples or expressways are the New York State ______, major interstate routes and parkways.
EXPRESSWAY DRIVING
“Expressway” means any divided highway where traffic moves in one direction on two or more lanes. You normally enter or exit the expressway on ramps (controlled-access). The speed limit is normally 55 mph (88 km/h), but can be posted at 65 mph (105 km/h) in some rural areas. Examples or expressways are the New York State Thruway, major interstate routes and parkways.
EXPRESSWAY DRIVING
Before you travel on an expressway, identify your entrance and ___ points on a road map. Know where to get on and off the expressway and be prepared to get into the correct _____ for your entrance and exit. If you enter an expressway going a ________ direction than you intended, or at the wrong exit, stay on the ________ until the next exit. After you exit the expressway, you can figure out where you need to go and (if necessary) get back on the expressway. IT IS DANGEROUS to ___ up on an entrance or exit ramp, or to try to cross a _____.
EXPRESSWAY DRIVING
Before you travel on an expressway, identify your entrance and exit points on a road map. Know where to get on and off the expressway and be prepared to get into the correct lanes for your entrance and exit. If you enter an expressway going a different direction than you intended, or at the wrong exit, stay on the expressway until the next exit. After you exit the expressway, you can figure out where you need to go and (if necessary) get back on the expressway. IT IS DANGEROUS to back up on an entrance or exit ramp, or to try to cross a median.
EXPRESSWAY DRIVING
Unless there is a STOP or YIELD sign or ______ light on the entrance ramp, use the ramp to _______ to expressway speed and _____ with traffic. Signal, then look over your shoulder for ______ already on the expressway. If necessary, slow down to safely _____ into traffic.
EXPRESSWAY DRIVING
Unless there is a STOP or YIELD sign or traffic light on the entrance ramp, use the ramp to accelerate to expressway speed and blend with traffic. Signal, then look over your shoulder for traffic already on the expressway. If necessary, slow down to safely merge into traffic.
EXPRESSWAY DRIVING
If the entrance lane is too short to allow acceleration to expressway speed, the safest method to enter is to ___ and wait for a large space in ______. Then enter the expressway and accelerate quickly. To avoid conflicts with other entrance lane traffic, ____ when necessary and merge into expressway traffic as soon as possible.
EXPRESSWAY DRIVING
If the entrance lane is too short to allow acceleration to expressway speed, the safest method to enter is to stop and wait for a large space in traffic. Then enter the expressway and accelerate quickly. To avoid conflicts with other entrance lane traffic, stop when necessary and merge into expressway traffic as soon as possible.
EXPRESSWAY DRIVING
As you drive on the expressway, make sure to signal all ____ changes and check over your shoulder to make sure you will not cut off any ______ behind you. Make sure your directional signal goes off after you change lanes.
EXPRESSWAY DRIVING
As you drive on the expressway, make sure to signal all lane changes and check over your shoulder to make sure you will not cut off any vehicles behind you. Make sure your directional signal goes off after you change lanes.
EXPRESSWAY DRIVING
Remain alert for traffic that enters ahead. If possible, move from the right lane when you approach the entrances to allow more room for traffic entering the expressway from the ramp.
EXPRESSWAY DRIVING
Remain alert for traffic that enters ahead. If possible, move from the right lane when you approach the entrances to allow more room for traffic entering the expressway from the ramp.
EXPRESSWAY DRIVING
To prevent a ___-minute lane change, check the destination and ___ signs, and get into the correct lane for your exit ahead of time. Make sure to _____ your exit at least 100 feet (30 m) before you reach the exit ramp. When you are on the exit ramp, _______ your speed. There is often a lower speed limit for the ramp.
EXPRESSWAY DRIVING
To prevent a last-minute lane change, check the destination and exit signs, and get into the correct lane for your exit ahead of time. Make sure to signal your exit at least 100 feet (30 m) before you reach the exit ramp. When you are on the exit ramp, decrease your speed. There is often a lower speed limit for the ramp.
EXPRESSWAY DRIVING
After you leave an expressway, look for speed limit signs and check your speedometer to be sure you are driving within the ______ limit. You are not likely to be on a 55 mph (88 km/h) road.
EXPRESSWAY DRIVING
After you leave an expressway, look for speed limit signs and check your speedometer to be sure you are driving within the posted limit. You are not likely to be on a 55 mph (88 km/h) road.
EXPRESSWAY DRIVING
Expressway driving normally combines ______ speeds with ____ traffic. The higher speed and amount of traffic require you to think faster and handle your vehicle in a more _______ manner than in most other conditions. On long trips, plan frequent rest stops. On a bright day, sunglasses can reduce ____ and eye fatigue.
EXPRESSWAY DRIVING
Expressway driving normally combines higher speeds with heavy traffic. The higher speed and amount of traffic require you to think faster and handle your vehicle in a more efficient manner than in most other conditions. On long trips, plan frequent rest stops. On a bright day, sunglasses can reduce glare and eye fatigue.
NIGHT DRIVING
About 90% of your decisions are based on what you ___. At night, you must use extra caution to make up for reduced ______. You should also know that the ability to see well at night decreases with age.
NIGHT DRIVING
About 90% of your decisions are based on what you see. At night, you must use extra caution to make up for reduced visibility. You should also know that the ability to see well at night decreases with age
NIGHT DRIVING
Night driving is more _______ because the distance you can see ahead or to the side is ______. You should drive slower than you would in _______, especially in areas that are not known or on ______ roads with many curves. Your headlights cover about ___ feet ahead. It is important that you drive at a speed that allows you to stop safely within that distance. This is called “driving within the _____” of your headlights.
NIGHT DRIVING
Night driving is more dangerous because the distance you can see ahead or to the side is reduced. You should drive slower than you would in daylight, especially in areas that are not known or on narrow roads with many curves. Your headlights cover about 350 feet ahead. It is important that you drive at a speed that allows you to stop safely within that distance. This is called “driving within the range” of your headlights.
NIGHT DRIVING
The law requires you to use your ________ from one-half hour after the sun ____ to one-half hour before the sun rises, when visibility is less than _____ feet (300 m) and when you use your windshield wipers to clear rain, snow or sleet. Turn your headlights on at ____, dusk and in fog. Even when headlights do not help you see in low-light periods, they make it easier for other drivers and pedestrians to ___ your vehicle. Do not use parking lights or daytime lights as a ________. Headlights do a better job. If an oncoming driver flashes headlights at you during a period of low _______, it means your vehicle was _______ to see and you should turn on your headlights.
NIGHT DRIVING
The law requires you to use your headlights from one-half hour after the sun sets to one-half hour before the sun rises, when visibility is less than 1,000 feet (300 m) and when you use your windshield wipers to clear rain, snow or sleet. Turn your headlights on at dawn, dusk and in fog. Even when headlights do not help you see in low-light periods, they make it easier for other drivers and pedestrians to see your vehicle. Do not use parking lights or daytime lights as a replacement. Headlights do a better job. If an oncoming driver flashes headlights at you during a period of low visibility, it means your vehicle was difficult to see and you should turn on your headlights.