CHAPTER 9 - Holding Procedures

Question 1

1. A procedure to alter level in a holding pattern is known as:

a. shuttle.
b. procedure turn.
c. base turn.
d. racetrack.

Answer 1

b. procedure turn.

Question 2

2. Unless otherwise published or informed by ATC, after entering a holding pattern all turns are made:

a. to the left.
b. to the left then right.
c. to the right.
d. procedure turn right then left.

Answer 2

c. to the right.

Question 3

3. In a holding pattern turns are to be made at a:

a. rate of turn = 3*/sec.
b. rate of turn = 3*/sec or 20* bank angle whichever is less.
c. rate of turn = 3*/sec or 25* bank angle whichever is less.
d. 25* bank angle.

Answer 3

c. rate of turn = 3*/sec or 25* bank angle whichever is less.

Question 4

4. What is the longest time you can fly the 30° offset leg of a joining procedure?

a. 1. minutes.
b. 2. minutes.
c. 3 minutes.
d. 30 seconds.

Answer 4

a. 1. minutes.

Question 5

5. You are cleared to join a hold at 6000 ft. At what distance prior to reaching the holding fix must you be established at 6000 ft?

a. 5 minutes flying time
b. 5 NM
c. 10 minutes flying time
d. 10 NM

Answer 5

b. 5 NM