Chapter 9

Question 1

A specific logical collection of authorized work for vessel labor that is uniquely identified, scheduled, budgeted and assigned to specific cost centers for accomplishment is a(n) ___.

Answer 1

Work order

Question 2

___ is a documented system used to identify, correct, and prevent conditions that creae excessive costs, unsatisfactory work performance, hazardous conditions, or undesirable trends.

Answer 2

Corrective action request

Question 3

What phase of construction (where) is the scope of work on work order number 6172-253-A scheduled to be worked?

Answer 3

Shop area

Question 4

A ___ is assigned to a specific cost center and is used to report earned value management system (EVMS) data.

Answer 4

Engineering change notice

Question 5

Under the bill system, work packages are identified using a ___ that identifies specific information about the ship, the system, and the type of work to be completed.

Answer 5

22- digit number

Question 6

A(n) ___ work order outlines different work order biling descriptions that ensure charges are assigned to the correct account within the shipyard. The work shown on this type work order could be done in a fabrication shop, integrated area, or the wet dock.

Answer 6

Numerical- type

Question 7

A(n) ___ work order is designaed for inverted and ship shape unit pre-outfitting prior to erection.

Answer 7

Alpha-type

Question 8

In the event rework is needed, a(n) ___ is completed by craft management to coordinate the completion of rework. It includes information such as work description, root cause, and defect code.

Answer 8

Rework collection form

Question 9

A Ripout (RO) is generated by the requesting craft, Test and Trails, or the ship construction manager using the ___ system.

Answer 9

Quality information

Question 10

___ is responsible for determining material availability and releasing Work Orders to craft.

Answer 10

Production Control

Question 11

A ___ view in a drawing is a cut from the three main views of an object. It is drawn for the purposte of revailing necessary information that may not be clearly shown in the three views independently.

Answer 11

Detail

Question 12

The ___ view of a ship is looking forward or aft.

Answer 12

Section

Question 13

The ___ view is used to show the relative location of the part, and is particularly helpful to assemble complet objects.

Answer 13

Exploded

Question 14

___ views give a clearer view of the interior or hidden features of an object that cannot be seen clearly in other views.

Answer 14

Sectional

Question 15

A(n) ___ projection is one in which the projector are other than perpendicular to the plane of projection.

Answer 15

Obliquie

Question 16

A ___ is used to eliminate the need to draw extra views of rolled shapes, ribs, and similar forms.

Answer 16

Broken-out section

Question 17

A(n) ___ section view shows parts such as ribs or spokes as if they are rotaed into or out-of the cutting plane.

Answer 17

Aligned

Question 18

A(n) ___ section cutting plan changes direction backward and forward (zig-zags) to pass through all the features of an object.

Answer 18

Offset

Question 19

A drawin that shows a single component/part and includes a complete description of the component/part is referred to as a ___ drawing.

Answer 19

Detail

Question 20

___ work is the largest section of work orders at Ingalls Shipbuilding.

Answer 20

Planned

Question 21

A ___ is used to coordinate and correct an error associated with a work order.

Answer 21

Request for service

Question 22

A ___ work order authorize construction services to carry out work such as rigging, scaffoldin, supervising, or special manufacturing to be accomplished in the shipyard.

Answer 22

Support

Question 23

When each work order is complete, its ___ is updated to keep track of progress and update the flow of material down the producion line.

Answer 23

Status

Question 24

A(n) ___ is a document that records or authorizes a change to a design. They are utilized for Class I and Class II changes for a ll contracts and design devevlopment or design correction changes that are NOT the result of a request for service.

Answer 24

Engineering change notice

Question 25

___ work includes Class II work order changes that result from an engineering change notice.

Answer 25

Unplanned

Question 26

In the Work Order number “2486-6172-E05-1-610-842-4300,” 2486 refers to the ___.

Answer 26

Hull number

Question 27

The three stages of a work order are complete, ___, and reinspection of reject.

Answer 27

Partial

Question 28

Revised views prompted by an Engineering Change Notice should identify the area affected on the drawing(s) by encircling/clouding the changed area and labeling with the corresponding ___.

Answer 28

was/is

Question 29

In the Word Order number “2486-6172-E05-1-842-4300,” 842 refers to the ___.

Answer 29

Cost center

Question 30

In the event rework is needed, a(n) ___ is complete by craft management to coordinate, the completion of reowrk. It includes information such as work description, root cause, and defect code.

Answer 30

Rework control report

Question 31

___ is responsible for determining material availability and releasing Work Order to craft.

Answer 31

Production control

Question 32

Metric dimensions are listed as fractions in blueprint drawings.

Answer 32

False

Question 33

Standard dimensions are listed as whole numbers in blueprint drawings.

Answer 33

False

Question 34

Notes about a specific part are usually pointed out on a blueprint with the use of detail or section lines.

Answer 34

False

Question 35

General notes provide any/all pertinent information not provided in the graphics of the blueprint.

Answer 35

True

Question 36

The reference block provides a list of reference materials that were used to create the blueprint.

Answer 36

False

Question 37

Quality critieria for material, standards o workmanship, or prescribed methods of construction are all examples of specifications that may be included in a drawing.

Answer 37

True

Question 38

What is the purpose of notes, specifications, and dimenstions on a blueprint drawing?

Answer 38

Identify important details to enable parts to be manufactured, add detailed reference information to the blueprint drawing, provide acceptable standards for construction

Question 39

____ is a statement or document that can be attached to the blueprint containing a description such as the terms of a contract or detail of an object not shown on the blueprint.

Answer 39

References

Question 40

___ serve two important purposes on a blueprint, provide size and/or spacing requirments for fabrication of components and the location where components should be place.

Answer 40

Dimensions

Question 41

What is the purpose of the scale block on a blueprint?

Answer 41

Shows the size of the ship model

Question 42

What is the purpose of surface texture information?

Answer 42

To identify the surface finish of materials

Question 43

What area of a drawing should be refered to in order to interpret the surface texture of a piece/part?

Answer 43

General notes

Question 44

What is the purpose of the text associated with a cutting plane line?

Answer 44

Refers the reader to specific pages, zones, or details within the same drawing or additional information and views

Question 45

The revision symbol is a ___.

Answer 45

Triangle

Question 46

The revision coloumn provides a list and description of all changes made to the drawing since its inital issue. It also includes other information such as what authorized each change and ___.

Answer 46

The sheet/ zone location of each change

Question 47

An area titled ___ on a blueprint indicates information is pending.

Answer 47

Reservation block