Chapter 7

Question 1

You have just set up a network that will use the TCP/IP protocol, and you want client computers to obtain IP configuration information automatically. Which type of server do you need for this?

DNS
DHCP
NAT
IP configuration server

Answer 1

B. A Dynamic Host Configuration Protocol (DHCP) server provides IP configuration information to hosts when they join the network. A Domain Name System (DNS) server resolves hostnames to IP addresses. NAT translates private IP addresses into public IP addresses. There is no IP configuration server.

Question 2

Which of the following protocols was designed to access information stored in an information directory, such as employee phone books?

FTP
LDAP
RDP
CIFS

Answer 2

B. Lightweight Directory Access Protocol (LDAP) is designed to access information stored in an information directory typically known as an LDAP directory or LDAP database. This typically includes employee data and network configuration data. FTP is designed to transfer files. RDP is a remote desktop protocol, and CIFS is used to share files and printers.

Question 3

Which TCP/IP protocol uses port 80?

HTTP
HTTPS
Telnet
POP3

Answer 3

A. HTTP uses port 80. HTTPS uses port 443; Telnet uses port 23; and POP3 uses port 110.

Question 4

What is the maximum number of IPv6 addresses that can be assigned to one IPv6 interface?

One (unicast)
Two (unicast and anycast)
Three (unicast, anycast, and multicast)
None of the above

Answer 4

D. An IPv6 interface is not limited in the number of addresses that it can be assigned, although there could be limitations based upon practicality.

Question 5

Which of the following are valid examples of IPv6 addresses? (Choose all that apply.)

2001:0db8:3c4d:0012:0000:0000:1234:56ab
::ffff:c0a8:173
2001:db8:3c4d:12::1234:56ab
2001::1ab4::5468

Answer 5

A, B, C. An IPv6 address contains 128 bits, written in eight 16-bit fields represented by four hexadecimal digits. Option A contains all eight fields expressed in full. Option B is an IPv4 address expressed in IPv6 form. Option C is the same address as Option A, but written in accepted shorthand. Option D is not valid because the double colons (::) can be used only once within an address.

Question 6

Which of the following IP addresses would not be valid for a DNS server on the Internet?

10. 25.11.33
11. 33.66.254
12. 118.63.11
13. 186.12.2

Answer 6

A. DNS servers resolve hostnames to IP addresses. On the Internet, a DNS server needs to have a public IP address. The address 10.25.11.33 is in a private address space, so that address would not be valid for a DNS server on the Internet.

Question 7

The workstations on your network are configured to use a DHCP server. One of the workstations can’t communicate with other computers. Its IP address is 169.254.1.18. What could be the problem?

The subnet mask is wrong.
It has a private IP address.
The default gateway is wrong.
It can’t reach the DHCP server.

Answer 7

D. The address assigned to the computer is an APIPA address. Microsoft client computers (and others) will configure themselves with an address in this range if they are unable to reach a DHCP server.

Question 8

Which of the following protocols is responsible for sending email?

IMAP4
POP3
SMTP
SNMP

Answer 8

C. Simple Mail Transfer Protocol (SMTP) is responsible for sending email. IMAP4 and POP3 both receive email. SNMP is a network management protocol.

Question 9

What port does the RDP protocol work on?

53
143
389
3389

Answer 9

D. Remote Desktop Protocol (RDP) works on port 3389. DNS works on port 53; IMAP4 works on port 143; and LDAP works on port 389.

Question 10

Which two TCP/IP protocols work at the Host-to-Host layer of the DoD model? (Choose two.)

IP
ARP
TCP
UDP

Answer 10

C, D. The two protocols that work at the Host-to-Host layer are TCP and UDP. IP and ARP both work at the Internet layer.

Question 11

What are two advantages that TCP has over UDP? (Choose two.)

Acknowledged delivery
Faster delivery
Lower overhead
Virtual circuits

Answer 11

A, D. TCP is a connection-oriented protocol that establishes virtual circuits and acknowledges delivery of packets. Because of these features, it has higher overhead than UDP and is a little slower.

Question 12

Your friend is concerned about the security of making an online purchase. What should you tell her to look for in the address bar of the web browser?

HTTP
HTTPS
SSH
TLS

Answer 12

B. The HTTP protocol is inherently unsecure, but the HTTPS protocol is secure. (SSH and TLS are secure as well, but they are not protocols used to connect to websites.)

Question 13

You are manually configuring a TCP/IP host. Another administrator gives you the router’s IP address. What is the TCP/IP term for this?

Default gateway
Subnet mask
DNS server
DHCP server

Answer 13

A. The router is your doorway out into other networks, and it is known in TCP/IP terms as the default gateway. Without this configuration option, you would not be able to get to external networks. The subnet mask tells a host which network it’s on. The DNS server resolves hostnames to IP addresses, and a DHCP server provides IP configuration information to hosts.

Question 14

Your network is running IPv4. Which of the configuration options are mandatory for your host to communicate on the network? (Choose two.)

IP address
Subnet mask
Default gateway
DNS server address

Answer 14

A, B. The only mandatory IPv4 configuration items are an IP address and a subnet mask. If you are not connecting to another network, you do not need a default gateway. DNS servers resolve hostnames to IP addresses, but they are not mandatory.

Question 15

Which of the following protocols is used for secure delivery of email?

SMTP
SNMP
POP3
IMAP4

Answer 15

D. IMAP4 and POP3 are the two protocols that are used for email delivery. Of the two, only IMAP4 provides security features. SMTP sends email. SNMP is a network management protocol.

Question 16

Which of the following is the name of a secure point-to-point connection made over a public network?

NAT
APIPA
VLAN
VPN

Answer 16

D. A virtual private network (VPN) is a secure point-to-point connection made over a public network. NAT translates private IP address to public IP addresses. APIPA is an automatic IP address assignment if a client computer can’t reach a DHCP server. VLANs are virtual local area networks configured through switches.

Question 17

Which of the following protocols uses TCP port 23?

Telnet
SSH
FTP
DNS

Answer 17

A. Telnet uses port 23. SSH uses port 22; FTP uses ports 20 and 21; and DNS uses port 53.

Question 18

Which of the following is an IPv6 broadcast address?

\::1
FE80::
FF00::
\::FFFF
None of the above

Answer 18

E. IPv6 does not have broadcasts. IPv6 does have multicasts, which are a bit like targeted broadcasts. FF00:: is the first part of a multicast address.

Question 19

You are setting up a small network that will not connect to the Internet. You want computers to be able to locate each other by using hostnames. What service will do this?

DNS
DHCP
FTP
APIPA

Answer 19

A. DNS is typically known as a name resolver on the Internet, but it will work on private networks as well. DNS resolves hostnames to IP addresses. DHCP automatically configures clients with IP address information. FTP is for file downloads. APIPA is a process used to assign clients a private IP address automatically when they can’t reach the DHCP server.

Question 20

Which of the following protocols is responsible for resolving IP addresses to hardware addresses?

DNS
DHCP
ARP
RARP

Answer 20

C. The Address Resolution Protocol (ARP) resolves IP addresses to hardware (MAC) addresses. RARP does the reverse—it resolves MAC addresses to IP addresses. DNS resolves hostnames to IP addresses. DHCP automatically configures TCP/IP clients.