Chapter - 4 Scope

Question 1

ASME VIII or any other recognized construction codes typically limit design basis to an external or internal design pressure no less than ,,,,,

Answer 1

15 lbf/in.2 (103 kPa).

Question 2

Storage vessels subject to internal pressures up to 15 lbf /in.2 (103 kPa) are covered in

Answer 2

API RP 575

Question 3

To prevent leakage, the edges of the seams and rivet heads were ,,,,

Answer 3

caulked

Question 4

Heat Exchanger tubes,where water is used as a cooling or condensing medium, they are generally made of,,,,,based alloys or ,,,.

Answer 4

copper ,,,, steel

Question 5

Heat Exchanger tubes made of Titanium may be used in ,,, applications

Answer 5

seawater

Question 6

Tubesheets for exchanger bundles are made of a variety of materials. Where water is the cooling or condensing medium, they are usually made of ,,, or ,,,

Answer 6

admiralty brass,,,,steel

Question 7

ASME Section VIII, Division 3 provides alternative rules for construction of high-pressure vessels with design pressure generally above ,,,,,,

Answer 7

10 ksi (70 MPa)

Question 8

In the U.S., heat exchangers and condensers are designed and built in accordance with ASME BPVC, TEMAStandards, API ,,,, and API,,,

Answer 8

API 660,,,,,API 661

Question 9

Both Divisions 1 and 2 of Section VIII of the ASME BPVC require the manufacturer of a vessel to have a ,,,,,,,. And,,,,,, needs to be provided, and the system implemented

Answer 9

quality control system,,,, written manual