Chapter 4- AIRCRAFT WELDING Flashcards
Name the three principle types of welding.
Gas welding, electric arc welding, and electric resistance welding.
What are some advantages of gas shielded arch welding?
The weld is strong, more ductile, and more corrosion resistant.
Which method of welding is less likely to cause buckling or warping of thin metal sheets?
Electric arc (or TIG) welding.
What is the purpose of shielding an arc weld with an inert gas?
The gas prevents atmospheric oxygen and/or nitrogen from contaminating the weld.
What is a common method of controlling expansion when welding a joint?
Place tack welds along the length of the joint.
What is the effect of inadequate penetration on a weld?
The weld will be weak.
What is the purpose of the flux used with brazing and silver soldering?
The flux cleans the base metal by removing any oxide film.
What type of flame is used when torch brazing or silver soldering?
A neutral flame.
What must be done to a soldering iron tip to increase the amount of heat transferred from the tip to the work?
The tip must be clean of all contaminates and properly tinned.
What is the preferred method for welding aluminum?
Tungsten Inert Gas (TIG) welding
What is the preferred method for welding magnesium?
Tungsten Inert Gas (TIG) welding.
What precautions must be observed in order to weld titanium?
All traces of oxygen and nitrogen must be kept away from the weld area.
Describe one type of repair that could be made to a dented steel tube cluster joint.
A formed steel patch plate could be welded over the damage area.
How can a soft flame be obtained without reducing the heat output of the torch?
Use a large tip and adjust the gas pressure accordingly.
What factors determine the amount of heat delivered by a gas welding torch?
The size of the torch tip and the gas pressure.
