Chapter 3 - Cabling and Topology Flashcards
“Which of the following topologies requires termination? A. Star B. Bus C. Mesh D. Ring”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“B. In a bus topology, all computers connect to the network via a main line. The cable must be terminated at both ends to prevent signal reflection.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Star-bus is an example of a \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ topology. A. transitional B. system C. hybrid D. rampant”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“C. Star-bus is a hybrid topology because it uses a star physical topology and a bus signal topology.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Of the topologies listed, which one is the most fault-tolerant? A. Point-to-point B. Bus C. Star D. Ring”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“C. Of the choices listed, only star topology has any fault tolerance.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“What term is used to describe the interconnectivity of network components? A. Segmentation B. Map C. Topology D. Protocol”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“C. Topology is the term used to describe the interconnectivity of network components.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Coaxial cables all have a(n) \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_ rating. A. resistance B. watt C. speed D. ohm”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“D. All coaxial cables have an Ohm rating. RG-59 and RG-6 both are rated at 75 Ohms.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Which of the following is a type of coaxial cable? A. RJ-45 B. RG-59 C. BNC D. Barrel”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“B. RG-59 is a type of coaxial cable.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Which network topology connects nodes with a ring of cable? A. Star B. Bus C. Ring D. Mesh”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“C. The aptly named ring topology connects nodes with a central ring of cable.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Which network topology is most commonly seen only in wireless networks? A. Star B. Bus C. Ring D. Mesh”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“D. Mesh is, for the most part, unique to wireless networks.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“Which of the following is a duplex fiber-optic connection? A. LC B. RJ-45 C. ST D. SC”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“A. Of the options given, only the LC connector is designed for duplex fiber-optic.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“What is the most common category of UTP used in new cabling installations? A. CAT 5 B. CAT 5e C. CAT 6 D. CAT 6a”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
“B. CAT 5e is the most common cabling category used today, although CAT 6 is gaining in popularity.”
Excerpt From: Michael Meyers. “CompTIA Network+ All-In-One Exam Guide (Exam N10-006).” iBooks.
