CHAPTER 3 Flashcards
AIM
Aeronautical Information Management
________ is about making sure that processes are in place that get the right information to the right person at the right time.
Information Management Requirements
Qualities for Information Management
- Clarity
- Efficiency
- Priority
- Quality
- Traceability
Material to be issued as part of ‘Integrated Aeronautical Information Package’ shall be thoroughly checked before submitted to AIS, to make certain that all necessary information has been included
Aeronautical Data
An AIS shall establish ______ and __________ which ensure that upon receipt of aeronautical data and information, quality requirements are met.
Verification and Validation Procedures
Data Quality Specifications
- Accuracy
- Resolution
- Integrity
Accuracy: The order of accuracy for aeronautical data shall be as specified in;
- Annex 11, Chapter 2
- Annex 14, Volumes 1 and 2
Three Types of Positional Data
- Surveyed points
- Calculated Points
- Declared Points
Resolution: The order of publication resolution of aeronautical data shall be that as specified in
Appendices 1 and 7
_____ shall be collected for aeronautical data processes and exchange points
Metadata
The ______ of aeronautical data shall be maintained throughout the data process from survey/origin to distribution to the next intended user.
Integrity
Integrity: validation and verification procedures for ROUTINE data shall:
AVOID corruption throughout the
processing of the data
Integrity: validation and verification procedures for ESSENTIAL data shall:
ENSURE corruption does not occur at any stage of the entire process
Integrity: validation and verification procedures for CRITICAL data shall:
ASSURE corruption does not occur at any stage of the entire process
__________ and ________ shall be protected in accordance with data error detection, security, and authentication techniques.
Aeronautical Data and Data Sets
Electronic aeronautical data sets shall be protected by the inclusion in the data sets of a ___________________ implemented by the application dealing with the data sets.
32 -bit Cyclic Redundancy Chek
__________ shall be introduced with the objective of improving the ____, _____, _____ and, _____effectiveness of aeronautical information services
Automation; timeliness, quality, efficiency and cost
In order to meet the data quality requirements, automation shall:
a) Enable digital aeronautical data exchange between the parties involved
b) Use aeronautical information exchange models and data exchange models designed to be globally interoperable.
QMS
Quality Management System
Quality management systems (QMS) shall be ________ and ________ encompassing all functions of an
aeronautical information service
implemented and maintained
Each QMS shall include the necessary ______, ________ and _______, including those for the use of metadata, to ensure and verify
that aeronautical data are traceable
throughout the aeronautical information data chain
policies, processes and procedures
The established QMS shall provide users with the necessary
assurance and confidence that distributed aeronautical data and\ aeronautical information satisfy the aeronautical data quality requirements for _____, _____, and _______.
Accuracy, resolution and Integrity
The organization of the AIS as well as the _____, _______, ________, and ____ of aeronautical data and aeronautical information shall take into consideration ___________ which facilitate their optimum utilization.
design, contents, processing and distribution of ; Human Factors principles
