Chapter 2 Configure a Network Operating System

Question 1

(choose most appropriate access method)
You are in the equipment room with a new switch that needs to be configured.
[] Console
[] Telnet/SSH
[] AUX

Answer 1

Console

Question 2

(choose most appropriate access method)
Your manager gives you a special cable and tells you to use it to configure the switch.
[] Console
[] Telnet/SSH
[] AUX

Answer 2

Console

Question 3

(choose most appropriate access method)
You access the IOS by using another intermediary device over a network connection.
[] Console
[] Telnet/SSH
[] AUX

Answer 3

Telnet/SSH

Question 4

(choose most appropriate access method)
You call your manager to tell him you cannot access your router in another city over the internet. He provids you with the information to access the switch trough a telephone connection.
[] Console
[] Telnet/SSH
[] AUX

Answer 4

AUX

Question 5

(Which command mode)
Switch>
Router>

Answer 5

User Exec Mode

Question 6

(Which command mode)
Switch#
Router#

Answer 6

Privileged Exec Mode

Question 7

Describe User Exec Mode

Answer 7

Mode allows acces to only a limited number of basic monitoring commands. It is often refered to as “view-only” mode.

Question 8

Describe Privileged Exec Mode

Answer 8

Mode allows access to all commands and feures. The user can useany monitorng commads and execute conifiguration and management commands.

Question 9

(Which command mode)

Switch(config)#

Answer 9

Global Configuration Mode

Question 10

Describe Global configuration Mod

Answer 10

From global config mode, CLI configuration changes are made that affect the operation of the device as a whole.

Question 11

(fill in the blank)

To move from user EXEC mode to privileged EXEC mode, use the ___________ command

Answer 11

enable